Overview
The Power Stop AR85148XPR is a rear drilled and slotted brake rotor for the 2012–2018 Ford F-150.
Power Stop builds this rotor from G3000 grade castings and finishes it with silver zinc plating to resist rust. Cross drilling helps cooling and the slots sweep away gas and dust, a design Power Stop says is popular for street and day track driving. The AR85148XPR is the rear rotor for the 2012–2018 F-150 in its listed trims, from XL and STX up to Platinum and King Ranch, giving owners a drilled and slotted pattern with silver zinc plating on the surface when the original discs need replacing.
Key features
- Power Stop credits the cross-drilled holes with rotor temperatures up to 180°F lower
- Slots keep a clear contact patch between the pad and the rotor
- Tru-Cast technology with precision machining
- Runout specification of 0.0015 and DTV specification of 0.005
- Balanced by milling, as with all Evolution rotors
- Zinc plated finish in silver for corrosion resistance
- G3000 grade casting
- Aimed at reducing fade
- Styled as a visual upgrade behind factory or aftermarket wheels.
Daily driving and day track use
A pickup used for commuting, weekend hauling and occasional fast highway runs puts steady, mixed demands on its brakes. Drilled and slotted rotors suit this kind of use because the holes and slots help manage heat and debris, but they work best when the pads are matched to the rotor and kept in good condition.
Pad compound matters as much as the rotor. Softer pads bite quickly but wear faster, while harder compounds last longer and may need more warm-up before they grip. Keep the rotor and pad surfaces clean, avoid grease on the friction faces, and clean the hub mounting face so the rotor runs true on the truck.
- Match pad compound to how the truck is driven
- Check for uneven pad wear across the axle
- Listen for squeal or grinding, which can mean pads are worn
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR85148XPR |
| UPC | 792088802538 |
| Product line | Power Stop Evolution |
| Position | Rear |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | The rotor is built to reduce fade under repeated braking. |
| Appearance | The finish suits both factory and aftermarket wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
The AR85148XPR is the rear rotor for the 2012–2018 Ford F-150 in the FX2, FX4, King Ranch, Lariat, Limited, Platinum, SSV, STX, XL and XLT trims. Earlier F-150 years and Super Duty trucks are not covered, so check your year, model and trim before buying.
Listed vehicles:
- 2012–2018 Ford F-150 (FX2, FX4, King Ranch, Lariat, Limited, Platinum, SSV, STX, XL, XLT)
F-150 model years before 2012 and the Super Duty trucks are not part of the AR85148XPR listing. Confirm your vehicle’s year, model and trim before ordering.









