Overview
The Power Stop Evolution AR85164XPR is a set of drilled and slotted rear brake rotors for the 2015-2017 Ford F-150. The rotors are cast iron with six lugs and are sold as a 2 wheel set, coated.
Drilled holes allow maximum rotor cooling and keep brake temperatures down in extreme operating conditions. Rounded slots wipe away gas and debris from the rotor face.
Power Stop says its drilled and slotted rotors are machined and mill balanced and guaranteed to fit the listed vehicle, and the silver zinc dichromate plating is applied to help prevent rust and corrosion. The AR85164XPR gives the rear brakes of a 2015-2017 F-150 a drilled and slotted face. The rotors are coated, which Power Stop pairs with silver zinc dichromate plating, and the maximum run-out and DTV limits describe how tightly each rotor is machined.
Key features
- Slotted and cross-drilled rear rotors
- Cast iron, 6 lugs
- 2 wheel set, coated
- Rounded slots keep a clear contact patch
- Silver zinc dichromate plating to prevent rust and corrosion
- Machined and mill balanced
- Maximum run-out 0.0032 in (0.08 mm)
Rear brakes on a half-ton
Rear rotors on a half-ton do less of the work than the fronts, but they still matter for parking brake hold and for stopping a loaded truck. The rear axle takes more weight when a bed is loaded or a trailer is hitched, so the rear pads and rotors can wear faster than expected. Inspect the rear axle at each service and note any uneven pad wear side to side.
Because both sides of the rear axle wear together, replacing the pair keeps the truck stopping straight. Choose pads that suit your typical load, since a heat-tolerant compound handles towing better than a light-duty pad. Check the parking brake function after installation and before any heavy hauling.
- Check rear rotor surface for cracks and blue spots
- Clean the hub face before mounting the rotors
- Confirm the parking brake engages fully after installation
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR85164XPR |
| Part type | Evolution drilled and slotted brake rotors |
| Disc material | Cast iron |
| Position | Rear |
| Number of lugs | 6 |
| Quantity | 2 wheel set |
| Coating | Coated |
| Maximum run-out | 0.0032 in (0.08 mm) |
| Maximum DTV tolerance | 0.0005 in (0.0125 mm) |
Vehicle fitment
It fits the 2015-2017 Ford F-150.
F-150 trucks from 2014 and earlier or 2018 and later are not covered by this rear rotor set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Owners hauling or towing with an F-150 get cross-drilled holes for cooling and slots for gas and debris on the rear brakes, in the 2015-2017 years only. The rotors are a rear-axle part, so the front rotors on the F-150 are not replaced by this set. Install the pair on clean hub faces, since run-out is measured against the hub, and use new pads. A technician should confirm brake feel before driving the truck.
What’s included
Two rear rotors, one for each side of the F-150.









