Overview
The Power Stop Evolution AR8554XPR is a set of drilled and slotted front brake rotors for the 1995-2001 Ford Explorer, 1995-2000 Explorer Sport, 1998-2002 Ford Ranger, 1997-2001 Mercury Mountaineer and the 1998-2002 Mazda B3000 and B4000. The vented cast iron rotors have five lugs.
The drilled holes help keep brake temperatures down under heavy use, and the rounded slots wipe away gas and debris to leave a clear contact patch.
Rotors in this family are machined and mill balanced and are guaranteed by Power Stop to fit the vehicle. Silver zinc dichromate plating is applied to help prevent rust and corrosion.
The same part number covers the Ford and Mercury vehicles and the two Mazda pickups in the list, so owners of the B3000 and B4000 can use it as well as Explorer and Ranger owners. It is a front-axle part and replaces the vented rotors on both sides.
Key features
- Slotted and cross-drilled front rotors
- Vented cast iron, 5 lugs
- 2 wheel set, coated
- Rounded slots clear gas and debris
- Machined and mill balanced
- Silver zinc dichromate plating against rust and corrosion
- Maximum run-out 0.0032 in (0.08 mm)
Front rotor and pad pairing
Front rotors carry most of the braking load, so they wear faster than rear rotors on many trucks and SUVs. Vented construction helps the disc shed heat between the two faces, which matters during repeated stops on long grades. Check the rotor faces for heat spots, deep grooves and blue discoloration whenever the front pads are changed.
Pad choice affects rotor life. Pads that suit slotted and drilled rotors help keep the contact face clean and wear even. Install both front rotors together so the axle brakes evenly, and use fresh hardware with clean hub faces. After the pads are installed, make several moderate stops to bed them in before heavy braking.
- Replace both front rotors together for even braking
- Inspect pads and rotors at the same service interval
- Clean rust from the hub face and rotor hat before fitting
- Use fresh pad hardware and anti-seize on the hub only
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR8554XPR |
| Part type | Evolution drilled and slotted brake rotors |
| Disc material | Cast iron |
| Style | Vented |
| Position | Front |
| Number of lugs | 5 |
| Quantity | 2 wheel set |
| Coating | Coated |
| Maximum run-out | 0.0032 in (0.08 mm) |
| Maximum DTV tolerance | 0.0005 in (0.0125 mm) |
Vehicle fitment
It fits the 1995-2001 Ford Explorer, the 1995-2000 Ford Explorer Sport, the 1998-2002 Ford Ranger, the 1998-2002 Mazda B3000 and B4000, and the 1997-2001 Mercury Mountaineer.
The Explorer Sport entry stops at 2000, so 2001-2002 Sport models are not covered, and the rear rotors for these vehicles are separate parts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors are a front-axle pair. Fit new pads and clean the hub faces so the rotors stay within Power Stop’s run-out limit, then have a technician check pedal feel before the vehicle is driven.
What’s included
Two front rotors, one for each wheel on the axle.
Not included: Brake pads and hardware are not included.









