Overview
The Power Stop JBR735XPR is a front slotted and cross-drilled brake rotor for the 1998–2007 Toyota Land Cruiser and the 1998–2007 Lexus LX470. The JBR735XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
The G3000 grade casting has a silver zinc plated finish. Beveled holes are drilled to help temperatures stay down during extreme braking.
The rotor is mill balanced and combines cross drilling with slots, which together reduce fade and help resist rust during normal use.
Drilled and slotted rotors of this design suit street use and day track driving. The holes handle cooling and the slots sweep away gas and dust.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Land Cruiser braking loads
Land Cruisers and LX470s are heavy vehicles, and their front brakes absorb a lot of energy on long descents and when loaded. A drilled and slotted rotor sheds heat from the pad surface and helps keep braking steady when the brakes get hot, which is common on mountain roads and trail approaches.
Rotor life depends on pad quality, how the vehicle is driven, and how well the hub is cleaned during installation. Look for uneven wear, scoring or a lip near the outer edge. Hard braking from high speed heats the pads and rotor quickly, so let the brakes cool gradually after a long descent.
- Clean rust from the hub face
- Check brake hoses for swelling
- Use a torque wrench on the wheel nuts
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR735XPR |
| UPC | 792088560148 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits the 1998–2007 Toyota Land Cruiser (Base) and the 1998–2007 Lexus LX470 (Base).
The JBR735XPR list starts at 1998 for the Land Cruiser, so 1995–1997 models and the LX450 are not on it, and this rotor is for the front axle only. Both the Land Cruiser and the LX470 entries name only the Base trim over the 1998–2007 span. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace front rotors in left and right pairs, and bed in the new pads with a gradual break-in procedure.









