Overview
The Power Stop AR8374XPR is a rear drilled and slotted brake rotor for the 2009–2010 Dodge Ram 2500 and 3500 and the 2011–2012 Ram 3500.
The rotor combines cross holes for cooling with slots that sweep gas and dust from the pad face. It is a rear rotor, cast to G3000 grade and finished in silver zinc plating for rust resistance.
Key features
- Cross-drilled holes, which Power Stop says keep rotors up to 180°F cooler
- Rounded slots sweep water, gas and dust from the contact patch between pad and rotor
- Precision machined with Tru-Cast technology
- Runout within 0.0015 and DTV tolerance within 0.005
- Mill balanced Evolution rotor
- Silver zinc plating helps resist rust in normal operation
- G3000 grade cast construction
- Reduces fade under hard braking
- It looks finished behind custom or factory wheels.
Rear rotors on a work truck
Rear brakes on a heavy pickup do a large share of the work when the bed is loaded or a trailer is hitched. Heat builds during long descents, and the rear discs can wear unevenly if the parking brake is used often or a caliper does not release fully. Checking both rear rotors during the same service helps catch these issues early.
When replacing rear rotors, clean the hub face and remove rust scale so the disc sits flat. Torque the wheel fasteners in a crisscross pattern and recheck them after the first few drives. Replace pads together with the discs so the friction surfaces wear at the same rate. Watch for pedal pulsation, deep grooves or a raised lip as signs that the rotor has reached the end of its life.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8374XPR |
| UPC | 792088805096 |
| Product line | Power Stop Evolution |
| Position | Rear |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | The rotor is designed to reduce fade. |
| Appearance | Its surface suits both factory and custom wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
It is a rear rotor for the 2009–2010 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT and TRX), the 2009–2010 Dodge Ram 3500 and the 2011–2012 Ram 3500 (Laramie, Laramie Longhorn, SLT and ST).
Listed vehicles:
- 2009–2010 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT, TRX)
- 2009–2010 Dodge Ram 3500 (Laramie, SLT, ST, SXT)
- 2011–2012 Ram 3500 (Laramie, Laramie Longhorn, SLT, ST)
The Ram 2500 is covered only for 2009–2010 and the Ram 3500 only through 2012. Confirm fit for your vehicle’s year, model and trim before ordering.









