Overview
The JBR1396XPR is a rear slotted and cross-drilled brake rotor for the 2010–2018 Lexus GX460, Toyota 4Runner and Toyota FJ Cruiser. Its beveled drill holes and rounded slots are designed to help hold temperatures down and keep the pad surface clean under extreme braking.
It suits owners of the 2010–2018 Lexus GX460, Toyota 4Runner and Toyota FJ Cruiser who want a rear rotor with a slotted and cross-drilled face rather than a plain disc.
Slots keep refreshing the pad surface as the wheel turns, which is why slotted rotors are often paired with pads made for them.
Key features
- Slotted and cross-drilled rear rotor
- Direct fit for the listed vehicles
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
- Slots keep a clear contact patch between pad and rotor
- Rotor run-out within 0.0015 and DTV tolerance within 0.005
- Coated rotor
Clean hub faces and seating
A rotor only runs true if it seats flat against the hub. Rust, paint or debris on the hub face can push the rotor slightly off center, which can make the pedal pulse during braking. Take a few minutes to clean the hub and wheel bearing surface before the rotor goes on.
Beveled holes and rounded slots help a rotor shed heat and clear the pad surface, but they only work as designed when the rotor is mounted correctly and the pads are matched to it. Inspect the caliper, hoses and pads while the wheel is off, since worn parts can affect how the new rotor performs.
- Clean rust and debris from the hub face
- Check the caliper and brake hoses
- Match pads to slotted rotors
- Re-check wheel nut tightness after a short drive
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1396XPR |
| UPC | 792088807557 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Rear |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It is a direct fit for the 2010–2015 and 2017 Lexus GX460 (Base, Luxury, Premium); the 2010–2018 Toyota 4Runner (Limited, SR5, TRD Off-Road, TRD Pro, Trail); and the 2010–2014 Toyota FJ Cruiser (Base).
Compare the rotor diameter, thickness, bolt pattern and weight with the rotor being replaced before buying, since those measurements confirm a match.
The GX460 covers 2010–2015 and 2017, the 4Runner covers 2010–2018, and the FJ Cruiser covers 2010–2014. Earlier 4Runner years are not covered. Check your vehicle’s year, model and trim before buying.
Installation notes
Mount the rotor on a clean hub face, free of rust and debris, so it seats flat.
What’s included
The JBR1396XPR is one rear brake rotor and comes with no other items.
Not included: Brake pads and mounting hardware do not come with the rotor.









