Overview
The Power Stop AR8574XPR is a front slotted and cross-drilled brake rotor for the 1999–2002 Ford F-350 Super Duty. The AR8574XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
The rotor is built on a G3000 grade casting with a silver zinc plated finish. Beveled holes are drilled to help temperatures stay down during extreme braking.
Mill balancing is paired with cross drilling and slotting, a combination that helps reduce fade and resist rust during normal use.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Front brake service tips
The front brakes do much of the work in a heavy truck, and that puts heat into the pads, rotor and caliper on every stop. A drilled and slotted rotor moves heat and debris away from the friction surface, but the system still relies on sound pads, a free caliper and a clean hub face.
Replace worn pads before they reach the wear indicator on the rotor surface, since bare backing plate contact damages the disc. Bed in new pads with progressive stops, avoid long downhill drags, and let the brakes cool before checking wheel temperature. Recheck lug torque after the first few drives.
- Inspect for cracks radiating from drilled holes
- Look for uneven pad wear between left and right
- Check the caliper slides and boots for leaks
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8574XPR |
| UPC | 792088923387 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | Beveled holes help rotors run up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 1999–2002 Ford F-350 Super Duty in the Lariat, XL and XLT trims.
It fits the F-350 Super Duty only, not the F-250, and covers the front axle for the 1999–2002 model years. Check your truck’s year, model and trim before buying.
Installation notes
Because the AR8574XPR is slotted and cross drilled, new brake pads and clean hub faces help the rotor seat and wear evenly on the front axle.









