Overview
The Power Stop JBR1355XPR is a rear slotted and cross-drilled brake rotor for the 2007–2018 Lexus LX570, Toyota Land Cruiser, Sequoia and Tundra. Because the rotor is both slotted and cross drilled, it combines debris clearing at the pad surface with extra cooling.
It suits owners of the 2007–2018 Lexus LX570, Toyota Land Cruiser, Sequoia and Tundra who want a rear rotor with a slotted and cross-drilled face rather than a plain disc.
A rotor’s face is where the pads grip, so a flat, clean surface with correct run-out matters for smooth braking.
Key features
- Slotted and cross-drilled rear rotor
- Direct fit for the listed vehicles
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
Bedding in new pads
New pads need to bed in against the rotor before the brakes perform at their best. The first few stops transfer a thin layer of friction material onto the rotor face, and the slots and drilled holes help keep that layer even. Avoid hard stops until the pads have settled.
Rear rotors on full-size trucks and SUVs often carry a heavier load when towing, so check for heat checking and uneven wear at each service. Keep the rear caliper slides clean and lubricated as the service manual directs. Rear pads can wear faster on vehicles that tow regularly, so check them at each service.
- Make several moderate stops before hard braking
- Keep caliper slides clean
- Check for heat checking across the face
- Let brakes cool after long descents
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1355XPR |
| UPC | 792088558732 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Rear |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It is a direct fit for the 2008–2011, 2013–2015 and 2017 Lexus LX570 (Base); the 2008–2011 and 2013–2018 Toyota Land Cruiser (Base); the 2008–2018 Toyota Sequoia (Limited, Platinum, SR5, TRD Sport); and the 2007–2018 Toyota Tundra (1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro).
Measure the diameter, thickness, bolt pattern and weight of the rotor being replaced, and compare them with this rotor before ordering.
The LX570 covers 2008–2011, 2013–2015 and 2017, and the Land Cruiser covers 2008–2011 and 2013–2018. The Sequoia and Tundra are covered through 2018 in the trims named above. Check your year, model and trim before buying.
Installation notes
Allow new pads to bed in with moderate stops before any hard braking.
What’s included
The JBR1355XPR is a brake rotor sold alone, with no extra parts included.
Not included: Pads and hardware are separate parts and are sold apart from the rotor.









