Overview
The Power Stop AR8626XPR is a front slotted and cross-drilled brake rotor for the 1992–2000 Chevrolet and GMC K3500 and the 1994–1999 Dodge Ram 2500 and Ram 3500. The AR8626XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
The holes are beveled and precision drilled to help hold temperatures down during extreme braking, and the rounded slots keep the pad-to-rotor contact patch clear of water, gas and dust.
Shoppers comparing front rotors for 1992-2000 Chevrolet/GMC K3500, 1994-1999 Dodge Ram 2500/3500 will find the AR8626XPR described by Power Stop as precision machined with Tru-Cast technology, with holes and slots that reduce fade.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Heavy-duty front brake care
Heavy-duty pickups and chassis cab trucks put larger loads through their front brakes, especially when towing or carrying equipment. Rotor wear tends to follow those loads, so pads, calipers and rotors are often replaced as a set. Choosing a rotor with cooling holes and clean slots can help manage heat on longer descents.
Older heavy trucks often carry corrosion on hub faces and caliper brackets. Clean these surfaces before mounting, and check the slide pins for free movement so the pads can release evenly. Brake fluid that has absorbed moisture boils at lower temperatures, so a fresh fluid change is a sensible step whenever the front brakes are serviced.
- Inspect caliper slide pins and boots
- Clean the hub face and remove any rust scale
- Replace brake fluid if it looks dark
- Replace rotors in pairs across the front axle
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8626XPR |
| UPC | 792088917515 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 1992–2000 Chevrolet K3500 (Base, Cheyenne, LS, Scottsdale, Silverado); 1994–1999 Dodge Ram 2500 (Base); 1994–1999 Dodge Ram 3500 (Base); and 1992–2000 GMC K3500 (Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX).
The AR8626XPR covers the front axle only, and the Dodge listing stops at 1999, so 2000 and newer Rams are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the AR8626XPR to the front brakes, check that the hub and caliper hardware are in good condition, and bed in the pads after installation.









