Overview
The Power Stop AR83080XPR is a front drilled and slotted brake rotor for the 2012–2017 Jeep Grand Cherokee (WK) SRT and SRT8 and the 2018 Grand Cherokee SRT.
The rotor combines cross holes for cooling with slots that sweep gas and dust from the pad face. It is the front rotor for the Grand Cherokee SRT in the years listed, and it matches the drilled and slotted pattern of the rear rotor for the same SRT models, with silver zinc plating over the surface.
Key features
- Cross-drilled holes, which Power Stop says keep rotors up to 180°F cooler
- Rounded slots sweep water, gas and dust from the contact patch between pad and rotor
- Precision machined with Tru-Cast technology
- Runout within 0.0015 and DTV tolerance within 0.005
- Mill balanced Evolution rotor
- Silver zinc plating helps resist rust in normal operation
- G3000 grade cast construction
- Reduces fade under hard braking
- It looks finished behind custom or factory wheels.
Front axle brake care
The front axle takes most of the braking load on a heavy SUV, so heat builds quickly during repeated stops on long downhill runs. Brake fluid that has absorbed moisture boils at a lower temperature and can make the pedal feel soft. Flushing the fluid on a regular schedule helps the front discs and calipers work as designed.
Check the front brake hoses for swelling, cracking or seepage at each service, and inspect the caliper slides for smooth movement. A sticking slide pin can wear one pad faster than the other and warp the disc. Clean the hub face before mounting a new rotor and check for runout with a dial indicator. Replace the rotors and pads together to keep the braking surface matched.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR83080XPR |
| UPC | 792088981738 |
| Product line | Power Stop Evolution |
| Position | Front |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | The rotor is designed to reduce fade. |
| Appearance | The surface finish suits factory or custom wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
It is a front rotor for the 2012–2017 Jeep Grand Cherokee (WK) in SRT and SRT8 form and the 2018 Jeep Grand Cherokee SRT.
Listed vehicles:
- 2018 Jeep Grand Cherokee (SRT)
- 2012–2017 Jeep Grand Cherokee (WK) (SRT, SRT8)
The Grand Cherokee Trailhawk and non-SRT trims are not on the AR83080XPR list. Confirm your vehicle’s year, model and trim before ordering.









