Overview
The Power Stop AR8655XPR is a front slotted and cross-drilled brake rotor for the 2001–2010 Chevrolet Silverado and GMC Sierra heavy-duty trucks, including the 2500 HD and 3500 versions. The AR8655XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
The slotted and drilled pattern is designed to reduce fade. The G3000 grade casting is silver zinc plated, which helps protect it from rust during normal use.
The rotor combines two features: slots that vent gas from under the brake pads and cross-drilled holes that aid cooling.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Towing and heavy loads
Front rotors on heavy-duty pickups carry a large share of the stopping work, especially when towing, hauling a payload or driving down long grades. Heat builds quickly in that area. Cross-drilled holes and slots give heat and pad gases a route out, which helps the brakes respond consistently during repeated stops.
Before fitting new rotors, look at the hub face for rust or debris and clean it so the rotor sits flat. Check the caliper slide pins for free movement, and inspect the brake hoses for cracks. Worn pads should be replaced with the rotors so the new surface is not damaged by a thin, uneven pad.
- Torque lug nuts in a star pattern
- Inspect rotor surfaces for deep grooves or blue heat spots
- Watch for pulsing through the pedal after installation
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8655XPR |
| UPC | 889906280835 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits these vehicles: 2002–2004 Chevrolet Avalanche 2500 (Base); 2001–2010 Chevrolet Silverado 2500 HD (Base, LS, LT, LTZ, WT); 2007 Chevrolet Silverado 2500 HD Classic (LS, LT, WT); 2001–2006 Chevrolet Silverado 3500 (Base, LS, LT, WT); 2007 Chevrolet Silverado 3500 Classic (LS, LT, WT); 2008–2010 Chevrolet Silverado 3500 HD (LT, LTZ, WT); 2001–2010 GMC Sierra 2500 HD (Base, SL, SLE, SLT, WT); 2007 GMC Sierra 2500 HD Classic (SL, SLE, SLT, WT); 2001–2006 GMC Sierra 3500 (Base, SL, SLE, SLT, WT); 2007 GMC Sierra 3500 Classic (SL, SLE, SLT, WT); 2007–2010 GMC Sierra 3500 HD (SLE, SLT, WT).
It covers 2500 HD and 3500 trucks and the 2002–2004 Avalanche 2500, and it does not cover 1500-class pickups. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Replace front rotors in left and right pairs, and bed in the new pads with a gradual break-in procedure.









