Overview
The Power Stop AR8586XPR is a front slotted and cross-drilled brake rotor for the 2003–2011 Ford Ranger, the 2001–2005 Ford Explorer Sport Trac and the 2003–2009 Mazda B4000. The AR8586XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
The slotted and drilled pattern helps reduce fade, and the G3000 grade casting carries silver zinc plating that protects it from rust during normal use.
The rotor combines two features: slots that clear gas from the pad surface and cross-drilled holes that aid cooling.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Before fitting front rotors
Front rotors take the heaviest load in everyday braking, so a rotor that runs out or pulses can be felt quickly through the pedal. Clean the hub surface, remove rust with a wire brush and check the wheel studs before the new rotor goes on. Confirm the caliper slides move freely, since a sticking caliper can drag and heat the new rotor unevenly.
A slotted and drilled face works well with pads in good condition, and it can wear pads faster than a plain rotor. Choose pads that suit the rotor type and the driving style. Bed in the new pads gradually, avoiding hard stops until the surface transfer is complete, and recheck the rotor for heat cracks after the first few weeks of use.
- Check the caliper bracket bolts for proper torque
- Inspect brake hoses for cracks or swelling
- Confirm wheel bearings have no play
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8586XPR |
| UPC | 792088553171 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | Drilled holes help keep the rotor up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
The AR8586XPR fits 2001–2005 Ford Explorer Sport Trac (Adrenalin, Base, XL, XLS, XLT), 2003–2011 Ford Ranger (Edge, FX4, Sport, Tremor, XL, XLT) and 2003–2009 Mazda B4000 (Base, SE).
The 2007–2010 Explorer Sport Trac is not on the AR8586XPR list, and the rotor covers the front axle only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the AR8586XPR to the front brakes, check that the hub and caliper hardware are in good condition, and bed in the pads after installation.









