Overview
The Power Stop AR8558XPR is a front slotted and cross-drilled brake rotor for the 1997–2002 Ford Expedition and the 1998–2002 Lincoln Navigator. The AR8558XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
The slotted and drilled pattern is designed to reduce fade, and the G3000 grade casting carries a silver zinc plating for rust protection in normal operation.
The AR8558XPR combines slots for degassing the brake pads with cross-drilled holes that aid cooling.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Front brake pairs
The Expedition and Navigator are heavy SUVs, and their front brakes carry most of the stopping load. A drilled and slotted rotor adds channels for gas and dust to leave the pad contact area, which can help keep braking consistent when the brakes get hot. Slots and holes work together, so both matter in heavy stop-and-go driving.
Front rotors should be replaced in left and right pairs so both sides brake the same way. When fitting, clean the hub face, check the caliper slides and tighten the bolts to the correct torque. Fresh pads matched to a performance rotor will bed in more evenly.
Signs that front rotors need attention include pulsation in the pedal, a shudder at higher speeds, a rough or grooved face and visible cracks near the holes. Inspect the rotor edge for a lip and measure thickness when the pads come off.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8558XPR |
| UPC | 792088552921 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The drilled holes help keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
The AR8558XPR fits 1997–2002 Ford Expedition (Eddie Bauer, XLT) and 1998–2002 Lincoln Navigator (Base).
Expedition and Navigator model years after 2002 are not covered by the AR8558XPR, and it only fits the front axle. Only Expedition years 1997–2002 and Navigator years 1998–2002 are named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace front rotors in left and right pairs, and bed in pads that suit a drilled and slotted rotor before normal driving.












