Overview
The Power Stop AR8588XPR is a front slotted and cross-drilled brake rotor for the 2001-2007 Ford Escape, the 2001-2006 Mazda Tribute and the 2005-2008 Mercury Mariner. It combines slots that clear gas, dust and water from the pad surface with cross-drilled holes that aid cooling.
It belongs to the Evolution line and is made from G3000 grade cast iron. It is precision machined with Tru-Cast technology and mill balanced. It is a direct-fit replacement for the front position, suited to drivers who want a slotted and drilled rotor in place of a plain one.
Key features
- Slotted and cross-drilled design
- The cross-drilled holes keep the rotor up to 180°F cooler.
- Slots sweep a clear contact patch between the pad and the rotor, clearing water, gas and dust
- G3000 grade cast
- Precision machined using Tru-Cast technology
- Rotor run out within 0.0015 and DTV tolerance within 0.005
- Evolution rotors are mill balanced
- Silver zinc plating helps resist rust during normal operation.
- Front position, direct fit
Front axle service tips
Front brakes usually carry the larger share of stopping force, so the front rotor and pads wear faster than the rear set. When a front rotor is replaced, match its diameter, hub bolt pattern and mounting face to the old part. Check the hub surface for rust or damage, since uneven contact can cause pulsation even when the new rotor is correct.
Slotted and cross-drilled rotors work by moving gas and water off the pad face and by letting heat escape through the holes. The drilled holes can also trap pad material, so the rotor face needs cleaning during service. Choose pads designed for this rotor type, and bed in the pads gradually after fitting so the transfer layer forms evenly.
- Clean the hub with a wire brush before mounting
- Torque wheel nuts in a star pattern
- Inspect the caliper and hoses while the wheel is off
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8588XPR (also PSTAR8588XPR) |
| UPC | 792088553195 |
| Product type | Disc brake rotor |
| Position | Front |
| Rotor type | Slotted and cross drilled |
| Coating | Rotors coated |
| Material | G3000 grade cast |
| Rotor run out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Power Stop AR8588XPR includes:
- 2001–2007 Ford Escape (Limited, XLS, XLT, XLT No Boundaries, XLT Sport)
- 2001–2006 Mazda Tribute (DX, ES, LX, i)
- 2005–2008 Mercury Mariner (Base, Convenience, Luxury, Premier)
The Escape fits 2001-2007, the Tribute 2001-2006 and the Mariner 2005-2008. Other model years and makes are not covered. Make sure your year, model and trim fit before ordering.
Installation notes
Brakes are a safety system, so have the rotor installed by a qualified technician. Replace brake parts as complete axle sets.
Bed in new pads and rotors the way the manufacturer directs, avoid hard stops during the break-in period, and re-check fasteners and braking performance after the first miles of driving. Inspect brake lines, calipers and brake fluid at the same time.
What’s included
- Front brake rotor, Evolution slotted and cross-drilled
Not included: Brake pads, calipers, brake lines and hardware are not included. Check whether the quantity is one rotor or a pair before ordering.









