Overview
The Power Stop AR8606XPR is a front slotted and cross-drilled brake rotor for 1989–1997 Chevrolet S10 and GMC Sonoma pickups, plus the S10 Blazer, Blazer, Jimmy, S15 Jimmy and Oldsmobile Bravada SUVs. The AR8606XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
Drilled, slotted and zinc plated, this rotor is aimed at drivers who want better heat control and pad contact, with a direct-fit design made for the listed vehicles.
Power Stop’s description of the AR8606XPR stresses two jobs for the surface: drilled holes help carry heat away, and slots keep gas, water and dust from building up between pad and rotor.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Older trucks and front brakes
Front rotors on older pickups and SUVs take a large share of braking, so they are often the first part of the system to show wear. Many of these trucks have been repaired or modified over the years, so check the hub, wheel bearings and steering components before fitting a new rotor. A good rotor on a worn hub can still produce vibration.
Drilled and slotted faces suit drivers who tow or regularly drive hills, but they also need well-seated pads and a clean rotor surface to perform well. Rust on the hub face can cause runout that no rotor can correct, so clean it with a wire brush and check for pitting. Replacing rotors in pairs keeps braking even from side to side.
- Check wheel bearings for play before mounting
- Clean rust from the hub and pilot surface
- Inspect brake hoses for cracking or swelling
- Replace pads when they reach the wear indicator
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8606XPR |
| UPC | 792088923554 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 1995–1997 Chevrolet Blazer (Base, LS, LT); 1989–1997 Chevrolet S10 (Baja, Base, Durango, EL, LS, Sport, Tahoe, ZR2); 1989–1994 Chevrolet S10 Blazer (Base, High Country, LT, Sport, Tahoe, Tahoe LT); 1992–1997 GMC Jimmy (Base, SL, SLE, SLS, SLT); 1989–1991 GMC S15 Jimmy (Base, Gypsy, SLE, SLS, SLT, Sierra Classic, Timberline); 1991–1997 GMC Sonoma (Base, SL, SLE, SLS); 1991 GMC Syclone (Base); and 1991–1994, 1996 Oldsmobile Bravada (Base).
The AR8606XPR list ends at 1997, so the 1998–2004 S10 and Sonoma and the 1997–2005 Blazer are outside it, and it fits only the front axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the AR8606XPR is slotted and cross drilled, new brake pads and clean hub faces help the rotor seat and wear evenly on the front axle.









