Overview
The Power Stop JBR1532XPR is a rear drilled and slotted brake rotor that comes as a pair. It is made from Tru-Cast castings that Power Stop says are precision machined to match the original equipment fit.
Rotor drill holes are oversized and counter-sunk, which helps lower brake temperature and guards against cracking. The drilled and slotted face gives more pad bite for shorter stops and improves wet weather braking. The gold zinc plating resists corrosion.
Key features
- More pad bite for shorter stops
- Oversized holes that help lower heat
- Counter-sunk holes guard against cracking
- Improves wet weather braking
- Gold zinc corrosion protection
Rear brake service tips
Rear brakes do less of the stopping work than front brakes, but they still wear, rust and can crack under heat. A rear rotor that has worn below its minimum thickness can cause vibration and uneven braking, and the parking brake may also need attention when rear parts are replaced. Inspect the rotor surface for heat checks and measure thickness before reusing it.
Oversized, counter-sunk holes are meant to move heat and debris away from the pad face. Holes also add edges that can wear pads faster, so pick a pad compound that matches your driving. Bed in new pads and rotors together so the friction layer transfers evenly.
Rear rotors on the same axle wear at similar rates, so inspecting both sides together is a sensible habit. Check the rear hardware, caliper slide pins and the parking brake adjustment while the wheel is off.
- Measure rear rotor thickness before fitting
- Replace rear pads with the rotors
- Clean the hub and wheel mounting face
- Check caliper slide pins for free movement
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1532XPR |
| UPC | 889906260370 |
| Position | Rear |
| Design | Drilled and slotted |
| Casting | Tru-Cast, precision machined |
| Drill holes | Oversized, counter-sunk |
| Plating | Gold zinc |
| Quantity | Pair |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and compare the rear rotor’s dimensions with your vehicle’s specifications.
Only the rear position applies to this rotor, so match it to the rear axle of your vehicle.
What’s included
A pair of rear brake rotors.
Not included: Brake pads and hardware are not included with the rotors.








