Overview
The Power Stop AR8658XPR is a rear slotted and cross-drilled brake rotor for 2007–2018 full-size Chevrolet, GMC and Cadillac trucks and SUVs, among them the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon and Escalade. The AR8658XPR is made for the rear axle, uses cross-drilled holes together with slots, and arrives coated.
Mill balancing and Tru-Cast precision machining are part of how Power Stop builds its Evolution rotors, which use drilled holes for cooling and slots to clear gas and dust.
The rear rotor has a rounded slot pattern, beveled drill holes and a G3000 grade casting, all machined to tight run out and DTV limits.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Rear brakes on full-size SUVs
Full-size SUVs with rear discs often carry passengers and cargo, which keeps the rear brakes working on hills and in stop-and-go traffic. The rear rotor shares the load with the front, and its condition affects how the vehicle stops in a straight line. Keeping the rear system balanced prevents one side from doing more work than the other.
Slots in a rear rotor collect dust from the pad, so clean the slot edges during pad changes. Watch for pulsing, which often points to uneven thickness, and for squealing when pads are worn. Check the rear caliper slide pins and boots at the same time, since sticky slides cause pad drag and rotor heat.
- Clean caliper slide pins with brake-rated grease
- Inspect rear brake lines for seepage
- Replace worn pads before they reach the rotor
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8658XPR |
| UPC | 792088553768 |
| Type | Slotted and cross drilled |
| Position | Rear |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 2007–2018 Cadillac Escalade (Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury); 2007–2018 Cadillac Escalade ESV (Base, Luxury, Platinum, Premium, Premium Luxury); 2007–2013 Cadillac Escalade EXT (Base, Luxury, Premium); 2007–2013 Chevrolet Avalanche (Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ); 2007–2018 Chevrolet Silverado 1500 (Custom, High Country, Hybrid, LS, LT, LTZ, SSV, WT); 2015–2018 Chevrolet Suburban (LS, LT, LTZ, Premier); 2007–2014 Chevrolet Suburban 1500 (LS, LT, LTZ, Z71); 2007–2018 Chevrolet Tahoe (Hybrid, LS, LT, LTZ, PPV, Premier, SSV); 2007–2018 GMC Sierra 1500 (Base, Denali, Hybrid, SL, SLE, SLT); 2007–2018 GMC Yukon (Denali, Denali Hybrid, Hybrid, SLE, SLT); 2015–2018 GMC Yukon XL (Denali, SLE, SLT); and 2007–2014 GMC Yukon XL 1500 (Denali, SLE, SLT). Model years run from 2007 to 2018 across 12 vehicle entries.
The AR8658XPR belongs on the rear axle and does not cover heavy-duty 2500 or 3500 models; model years before 2007 are not on its list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the AR8658XPR on the rear axle only, and plan on fresh brake pads, since a drilled and slotted face works with pads that are in good condition.









