Overview
The Lazer-Fit Full Cage Kit (part number 13-19-020) is a complete weld-in full cage for the 1976–1986 Jeep CJ7 and the 1987–1995 Jeep Wrangler (YJ). The kit is designed with four-wheeling in mind and includes every piece of tubing and plate steel needed to assemble a complete full cage.
The cage uses CNC laser-notched DOM tubes and laser-etched assembly marks that make assembly easier. The design has better head clearance, strengthening gussets and all-tube A-pillars. The kit can be assembled in about an hour, which does not include finish welding or R&R (removal and replacement). It suits home builders as well as shops.
Key features
- Complete weld-in full cage kit with all tubing and plate steel
- CNC laser-notched DOM tubes
- Laser-etched assembly marks and part identification on the bent tubes
- All-tube A-pillars and strengthening gussets
- Better head clearance than earlier versions
- Bare steel, ready to weld together
Preparing for a weld-in cage
A weld-in cage starts with a flat, level work area and a plan for the order of welds. Tack each joint first, check alignment, and then finish weld in small sections to limit heat distortion. Gussets and the all-tube A-pillars help the structure, so keep their joints square as you go.
Preparation matters as much as welding. Grind the tube ends and mating surfaces to bare metal, and keep welding areas clean. Test-fit the cage in the vehicle before final welds, check the head clearance with a helmet, and leave access for the seat belts and harness. After welding, coat bare steel to prevent rust, and inspect every joint once the finish is cured.
- Level work area and a planned weld order
- Tube ends ground to bare metal
- Head clearance checked before final welds
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-19-020 |
| UPC | 614901724592 |
| Installation type | Weld in |
| Finish | Bare steel |
| Tubing | DOM, CNC bent |
| Models | 1976–1986 Jeep CJ7; 1987–1995 Jeep Wrangler (YJ) |
| Fitment type | Direct fit (per Poison Spyder) |
Vehicle fitment
The kit is designed for the 1976–1986 Jeep CJ7 and the 1987–1995 Jeep Wrangler (YJ) and is made for those models only.
The list does not include the Wrangler TJ or any Wrangler after 1995. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a weld-in kit, so finish welding is part of the job, and the bare steel needs a protective finish once assembly is done. Poison Spyder’s one-hour assembly time does not include finish welding or R&R.
Have a qualified welder or shop complete the finish welds, since a roll cage carries crash loads.
What’s included
All of the tubing and plate steel componentry for a complete full cage, with the laser-etched assembly marks. Finish welding is not part of the assembly time.














