Overview
The Poison Spyder 11-16-020-DC is a BFH front bumper in bare steel with recovery shackle tabs and a Comp Stinger. BFH stands for Built For the Hammers, and the bumper is designed for hardcore four-wheelers who want strength, simplicity and function, with a focus on ground clearance, tire clearance and approach angle.
The BFH front bumper is cut by CNC laser from a single piece of 3/16 inch plate steel and brake-formed for an exact fit. It is no wider than the Jeep’s frame rails and has angled facets that help it slide over rocks. The Comp Stinger adds forward-roll prevention and protects the radiator area and engine compartment in a rollover.
Key features
- Bare steel finish, ready for paint or powder coat
- CNC laser-cut from a single piece of 3/16 inch plate steel
- Stubby width, no wider than the frame rails
- Integrated winch mount in a one-piece design
- Comp Stinger for forward-roll prevention and radiator protection
- Recovery shackle tabs machined from 1 inch thick plate steel for 3/4 inch recovery shackles
- Shackle tabs matched to the bumper angles for no loss of approach angle
- D-ring mounts included
Building a recovery setup
A front bumper with shackle tabs and a winch mount is the anchor of a recovery setup, not the whole system. The winch, the line, the recovery shackles and the D-ring mounts all have to match one another. Check that the winch’s mounting plate and line capacity suit the loads you expect, and that every shackle is rated for the tab it attaches to.
Recovery points take shock loads, so inspect the tabs, welds and mounting bolts after heavy use. Look for cracks around the tab base, loose hardware and paint that has chipped from the bare steel. Bare steel rusts quickly in wet or salted conditions, so a coat of paint or powder coat soon after installation is a practical step.
- Winch sized to the bumper’s winch mount
- Rated recovery shackles for 3/4 inch shackle tabs
- Synthetic rope or steel cable matched to the winch drum
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 11-16-020-DC |
| UPC | 614901723564 |
| Product type | Front bumper with shackle tabs and Comp Stinger |
| Position | Front |
| Material | Steel |
| Finish | Bare |
| Plate thickness | 3/16 inch |
| Width | Stubby |
| Winch mount | Included |
| D-ring mount | Included |
| Light mounts | Not included |
| Shackle tab stock | 1 inch thick plate steel, for 3/4 inch recovery shackles |
| Fit type | Direct fit |
Vehicle fitment
The bumper is no wider than the Jeep’s frame rails. Confirm fit for your vehicle’s year, model and trim before ordering.
Compare the bumper’s width and mounting points with your Jeep’s frame rails before buying.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Bumpers add significant weight to the front of a vehicle, so use a helper or lifting equipment during installation. Tighten all hardware to the torque values for the mounting points and use every fastener included.
Re-check the mounting bolts after the first miles of driving. Confirm clearance around sensors, lighting and the winch or recovery equipment you plan to use, and check local regulations on bumper height and lighting.
The Comp Stinger’s forward reach and height vary between measurements, so check a drawing or measure your setup if clearance matters.
What’s included
- BFH front bumper in bare steel
- Recovery shackle tabs
- Comp Stinger
- Integrated winch mount
- D-ring mount
Not included: Light mounts are not included. Plan for a winch, shackles and finishing materials separately.
















