Overview
The Poison Spyder Brawler front and rear bumper with tire carrier, part number JKSPECIAL07, is a Genuine Packages set of bare steel bumpers for the 2007-2016 Jeep Wrangler JK. The front bumper is the Brawler Lite, a mid-width high clearance design in 3/16-inch plate steel with an integrated winch mount, and the rear has an integrated 2-inch receiver.
The Brawler Lite is a grille-width design whose ends protect the lower corner of the JK grille without hindering tire clearance. It mounts without cutting or altering the Jeep’s frame rails, unlike Poison Spyder’s BFH bumpers for JK. The factory crash bar may stay or be removed; if kept, Poison Spyder recommends the Brawler Lite Skid Plate, which is sold separately.
The Brawler Bar is a low-profile stinger of 1-3/4-inch diameter .120 wall DOM tubing that protects the winch, grille and radiator area. Two gusset styles are offered, and Warn PowerPlant winches are not a direct fit with the DOM tube gussets.
Key features
- Front bumper in 3/16-inch plate steel with integrated winch mount
- Mid-width high clearance design
- Mounts without cutting or altering the frame rails
- Brawler Bar stinger from 1-3/4-inch .120 wall DOM tubing
- Recovery shackle tabs machined from 1-inch steel billet for 3/4-inch shackles
- Integrated 2-inch receiver
- Provisions for recessed backup lamps
- Bare steel
Bumper choices for the JK
A bumper set changes the front and rear profile of the vehicle, so think about how the parts sit against the body and frame. A stubby front reduces overhang for better approach angles, while a rear bumper with a receiver adds a mount for accessories. Plan the layout before drilling or welding.
Bare steel rusts quickly if left unfinished, so clean the metal, prime it and finish it with paint or powder coat before mounting. Hardware should be coated or zinc plated, and bolt holes should be checked for burrs before assembly.
Tire carriers add weight at the rear and affect the approach and departure angles of the vehicle. Check the mounting points and carrier bolts after the first trips, since a loose carrier can damage the bumper or the tailgate area.
- Prime and finish bare steel before use
- Check tire carrier bolts after rough trails
- Use coated or zinc plated hardware
- Plan receiver accessories before mounting
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | JKSPECIAL07 |
| UPC | 700007616801 |
| Product | Front and rear bumper set with tire carrier |
| Bumper line | Poison Spyder Brawler |
| Material | Steel plate, 3/16 in |
| Finish | Bare |
| Width | Stubby (mid-width) |
| Body styles | 2 and 4-door models |
| Receiver | Integrated, 2 in |
| Brawler Bar tubing | 1-3/4 in diameter, .120 wall DOM |
| Shackle size | 3/4 in recovery shackles |
| Winch mount | Included |
| Light mounts | Included |
| D-ring mount | Included |
Vehicle fitment
Poison Spyder lists JKSPECIAL07 for the 2007-2016 Jeep Wrangler JK in 2 and 4-door models.
The JK 2017-2018 model years and the JL, TJ and LJ generations are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bare steel needs paint or powder coat. The Brawler Lite can be mounted without cutting the frame rails. Warn PowerPlant winches need minor modifications by the installer to fit with the DOM tube gussets.
What’s included
- Brawler front bumper
- Rear bumper with integrated 2-inch receiver
- Tire carrier
Not included: the Brawler Lite Skid Plate, a winch and paint or powder coat.






















