Overview
The JcrOffroad DIY Grill Hoop, part number DIY-JK-GRLHP, is a bare steel grill hoop made from 1-3/4 inch round tubing for the 2007–2016 Jeep Wrangler JK.
The grill hoop is the same piece used on the JK Mauler Deluxe bumper, sold here as a do-it-yourself part. It is hand built in the USA and is a do-it-yourself piece for the Wrangler JK.
Key features
- Made from 1-3/4 inch round tubing
- Same grill hoop as the JK Mauler Deluxe bumper
- Bare steel finish
- Hand built in the USA
- Includes a JcrOffroad sticker
Painting and fitting a bare hoop
A bare steel hoop rusts quickly if left unfinished, so plan the finish before mounting. Clean off mill scale and oil, then prime and paint or coat the hoop before installation or after test-fitting it on the vehicle. Make sure the coating reaches all welds and seams, since those spots are where corrosion starts first.
Test-fit the hoop against the grille and any lights or accessories before final mounting. Hoops carry the weight of attached lights and sometimes a winch, so check the mounting points for cracks and make sure the bolts hold tight. Pay attention to clearance under the hood and to how the hoop lines up with the front fascia.
- Remove mill scale and oil before coating
- Check welds for cracks after install
- Confirm clearance with the hood closed
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | DIY-JK-GRLHP |
| UPC | 700007583171 |
| Material | Steel |
| Tubing | 1-3/4 in round |
| Finish | Bare |
| Width | Full |
| D-ring mounts | Not included |
| Light mounts | Not included |
| Winch mount | Not included |
| Fit type | Direct fit |
Vehicle fitment
The DIY-JK-GRLHP fits the 2007–2016 Jeep Wrangler JK.
The hoop is made for the JK generation and not for the TJ or YJ Wranglers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The finish is bare steel, so painting or coating is up to the installer.
What’s included
- Grill hoop in bare steel
- JcrOffroad sticker
Not included: Bumper, D-ring mounts, light mounts and a winch mount.












