Overview
The Bestop HighRock 4×4 High Access Front Winch Bumper in textured black, part number 42918-01, is a laser-cut steel front bumper for the 2007–2018 Jeep Wrangler (JK), fitting both two-door and four-door models. Bestop developed it for hard-core rock crawlers.
Bestop built the high-access design for greater off-road clearance. The D-ring mounts are fully MIG welded, and the bumper has predrilled holes for common winch bolt patterns.
Key features
- High-access design for greater off-road clearance
- 3/16 inch laser-cut steel
- E-coat undercoating with a satin black powder-coat finish
- Fully MIG-welded D-ring mounts
- Predrilled mount holes for common winch bolt patterns
- Mounting brackets for the factory JK fog lights are included
- Fits two-door and four-door Wranglers
- Optional Tubular Grill Guard in chrome or black, sold separately
Winch and bumper setup
A front winch bumper adds weight and changes the way the front end is loaded, so consider the winch and the bumper together. The winch mount and predrilled holes make it easier to set up a winch, but the winch itself is a separate purchase. Confirm the winch capacity suits the vehicle, and check that the bumper’s bolt pattern lines up with the winch you choose.
The fog light brackets and D-ring mounts are the parts most often checked after rough use. Look for loose bolts, weld cracks at the mounts and any movement of the bumper on the frame. Add a grill guard only after confirming it fits the bumper and clears the radiator and lights.
- Winch and bumper bolt pattern
- Recovery strap and D-ring condition
- Fog light bracket alignment after trail use
Specifications
| Brand | Bestop |
|---|---|
| Part number | 42918-01 |
| UPC | 77848092955 |
| Product type | Front winch bumper |
| Position | Front |
| Width | Full |
| Material | Steel, laser cut |
| Steel thickness | 3/16 inch |
| Finish | Textured; E-coat undercoating with satin black powder coat |
| D-ring mount | Included, MIG welded |
| Light mounts | Included, for factory JK fog lights |
| Winch mount | Included |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler (JK) models, in two-door and four-door body styles.
The Wrangler TJ and JL are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper has predrilled holes for common winch bolt patterns; the winch is separate.
What’s included
The front bumper with its D-ring mounts, mounting brackets for factory JK fog lights and winch mount.
Not included: The optional Tubular Grill Guard, part 42915-01 in black or 42915-00 in chrome, is sold separately.


























