Overview
The Poison Spyder Brawler front bumper is a mid-width, high clearance bumper for 4-door Jeep Wrangler JK models, in bare 3/16″ plate steel. It has an integrated winch mount, an integrated 2″ receiver and provisions for mounting recessed backup lamps.
Poison Spyder JK Rocker Knockers protect the rocker panels and attach to the body at 14 bolt locations. The tubular rocker rail is 1.75 inch X .120 wall DOM tubing, and the slider rail is 1.5 inch X .120 wall DOM tubing, with a slider skid filling the gap between them.
Key features
- Mid-width, high clearance front bumper from 3/16″ plate steel
- Integrated winch mount and integrated 2″ receiver
- Provisions for recessed backup lamps
- Rocker Knockers attach to the body at 14 bolt locations
- Slider rail from 1.5″ X .120 wall DOM tubing with a laser-cut slider skid
- Outer skid from 1/8″ steel can be removed and replaced
- Compatible with body lifts and long arm kits, because the rocker knockers mount to the body tub
- Brawler Bar from 1-3/4″ diameter .120 wall DOM tubing
Body lift and bumper fit
A front bumper that mounts to the frame and rocker knockers that mount to the body tub respond differently when the body and frame are separated. A body lift moves the body relative to the frame, so check the grille, headlight and hood clearance after the bumper is in place. A heavy bumper with a winch also adds load to the front suspension, which can change ride height and steering feel, so recheck fit once the vehicle is loaded for the trail.
Wiring for recessed backup lamps and the winch mount should be planned before final assembly, so cables can route cleanly behind the bumper. Bare steel needs paint or powder coat, and bolt holes and welds should be coated to slow rust. Re-check every mounting bolt after the first few drives and after each suspension change.
Specifications
| Brand | Poison Spyder |
|---|---|
| UPC | 700007616831 |
| Type | Front bumper for JK, 4-door models |
| Material | 3/16″ plate steel |
| Finish | Bare steel |
| Width | Mid-width, high clearance |
| Winch mount | Integrated |
| Receiver | Integrated, 2″ |
| Rocker rail tubing | 1.75″ X .120 wall DOM |
| Slider rail tubing | 1.5″ X .120 wall DOM |
| Body styles | 4-door |
Vehicle fitment
This Brawler version fits the 2007–2018 Jeep Wrangler JK in 4-door models.
It is for 4-door Jeep Wrangler JK models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The Rocker Knockers mount to the body tub, so they lift with the body when a body lift is installed. The bare steel needs paint or powder coat.
What’s included
- Front bumper with integrated winch mount and 2″ receiver
Not included: a winch, fairlead and paint or powder coat.


























