Overview
The G2 Axle and Gear pinion shim, part number 15-SK15, is a spacer that goes on the differential pinion to help set its depth in the carrier. Pinion depth controls how the pinion gear meshes with the ring gear, so shim thickness matters during setup.
Compare the shim with the one it replaces to confirm thickness before installing. Treat the part number as the identifier and verify size against your existing shim.
Shim selection and setup
Shim selection is the step that sets pinion depth after the gear set and carrier are chosen. A shim that is only slightly off can change tooth contact and cause noise under load, so the stack is measured and confirmed before the carrier is reassembled.
Pinion depth is normally checked with a gauge and a contact pattern using marking compound. Keep the shims clean and dry, and avoid bending or creasing them during assembly. If the depth cannot be matched with the available shims, the gear set itself should be reviewed before the job continues.
- Clean each shim before placing it on the pinion
- Use marking compound for the contact check
- Review the gear set if depth cannot be matched
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 15-SK15 |
| UPC | 682034187973 |
| Part type | Pinion shim |
Vehicle fitment
Confirm fit for your carrier before installing, since the shim must match the pinion and ring gear set.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shim selection is part of pinion setup. Measure the existing depth and compare it with the new shim before the carrier is reassembled, and have a qualified shop verify the result.
What’s included
The package is one pinion shim.








