Overview
The Crown Automotive JA006753 is a shim kit for a Model 20 or Model 18 transfer case. Confirm the application on your vehicle before installing the shims.
It fits the 1959–1960 and 1966 Jeep CJ-3, the 1959–1960 and 1966–1971 CJ-5 and CJ-6, the 1946–1949 Willys CJ-2, the 1949–1958 Willys CJ-3, the 1955–1958 Willys CJ-5 and the 1956–1958 Willys CJ-6.
Key features
- Shim kit with a transfer case application
- Crown Automotive part number JA006753
- Fits early CJ and Willys models
Transfer case shim basics
Shims in a transfer case set the position or clearance of a gear or bearing, so the thickness matters as much as the part itself. Too little shim can let parts knock or wear unevenly, and too much can pinch the gears and cause early noise. Before removing any old shims, measure them and note where each one came from, because the stack is often built to match a specific clearance.
When the case is opened, inspect the gears, bearings and seal surfaces for wear or heat marks. A shim kit is usually used when the case is being rebuilt, so check the gasket and seals at the same time. Keep the shims clean and dry, and avoid reusing any that are bent or scored.
- Measure old shims before removing them
- Keep shims in the order they were removed
- Inspect gears and bearings while the case is open
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | JA006753 |
| UPC | 848399073355 |
| Application | Model 20 or Model 18 transfer case |
Vehicle fitment
It fits the 1959–1960 and 1966 Jeep CJ-3, the 1959–1960 and 1966–1971 CJ-5 and CJ-6, and several Willys CJ models from 1946 to 1958.
The list does not include the CJ-7, the Scrambler or any Wrangler model.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shim kit, Crown Automotive part number JA006753.








