Select your vehicle
-13%

PINION SHIM

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear pinion shim, part number 15-SK14
  • Spacer used to set pinion depth
  • No thickness, material or vehicle listed

Description

Overview

The G2 Axle and Gear Pinion Shim, part number 15-SK14, is a thin spacer for the differential pinion. Shims of this kind are placed on the pinion to set pinion depth, which is the position of the pinion gear relative to the ring gear.

Compare the shim with the one it replaces to confirm thickness and fit before installing.

Measuring pinion depth

Pinion depth is the position of the pinion gear relative to the ring gear, and it is set by the thickness of the shim stack behind the pinion bearing. Even a small change in thickness can alter tooth contact, so the new shim should be compared carefully with the old one before the carrier goes back together.

A gauge set and a contact pattern check are the usual ways to confirm the result. Replace the shim only with one that measures the same or within the needed range, and keep the stack in the same order as before. Shims are often replaced together with the pinion bearings during a gear set rebuild.

  • Measure the old shim stack before disassembly
  • Check the tooth contact pattern after setup
  • Replace shims with the pinion bearings when rebuilding

Specifications

Brand G2 Axle and Gear
Part number 15-SK14
UPC 682034187966
Part type Pinion shim (spacer)

Vehicle fitment

Confirm fit for your carrier before installing, since the shim must match the pinion and ring gear set.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Pinion depth is set by selecting shim thickness, so measure and confirm the depth with a proper gauge before final assembly. A qualified shop should handle the setup.

SKU: G/215-SK14 Category:

Specification

Shipping weight 0.10 lbs
Package dimensions 4.00 × 4.00 × 4.00 in
brands

Questions & Answers

What is the G2 Axle and Gear pinion shim part number 15-SK14?

The part number is 15-SK14, and the brand is G2 Axle and Gear. The UPC is 682034187966. It is a pinion shim, a spacer used to set pinion depth.

What thickness is this pinion shim?

Measure the shim you are replacing and compare it with the new part number before installing. Pinion shims come in different thicknesses, and a shop with the proper gauge can confirm the final depth.

Will this shim fit my vehicle?

Match the year, model and trim of your vehicle before ordering. Make sure the shim matches your carrier, pinion and ring gear set before setup.

Why does pinion depth matter after a gear swap?

Pinion depth controls how the gear teeth contact each other. Incorrect depth can cause noise, rapid tooth wear or contact at the tooth ends. Measure and confirm depth whenever the ring and pinion set changes, and reuse the shim only if the reading matches.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon