Overview
The G2 Axle and Gear Mini Air Compressor, part number G/270-AC1, is a compact 12 volt compressor built to actuate the Core Locker and DRS Sway Bar system. It has built-in ports for four solenoid valves. It is universal fit, so it is not tied to a particular vehicle model or year.
It is rated at a 25 percent duty cycle at 40 psi, has a maximum air pressure of 150 PSI, and draws 5.5 amps from its 12 volt supply.
Key features
- Compact design built to actuate the Core Locker and DRS Sway Bar system
- Built-in ports to support four solenoid valves
- 12 volt operation with a 5.5 amp draw
- Maximum air pressure of 150 PSI
- Universal fit
Wiring and duty cycle
A mini air compressor runs in cycles, filling a tank or lines and then resting while it cools. Running it continuously past its rated duty cycle heats the motor and shortens its life, so allow rest periods during any test or repeated actuation. Mount the compressor on a solid, dry surface away from direct heat, exhaust parts and road spray. Keep the power leads short, secure them away from moving parts, and use a relay where the draw or switching demands it. Solenoid valves add their own load and can be sensitive to moisture, so a small inline filter and a drain habit help protect them. Check air lines and fittings for leaks after installation, since a small leak makes the compressor run more often than needed.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | G/270-AC1 |
| Voltage | 12 volt |
| Amp draw | 5.5 amps |
| Duty cycle | 25 percent @ 40 psi |
| Maximum air pressure | 150 PSI |
| Solenoid valve ports | Four |
Vehicle fitment
This is a universal item, not a vehicle-specific part. It is designed for the Core Locker and DRS Sway Bar system, so confirm that system on your vehicle before ordering. Match the 12 volt rating to your electrical system.
Installation notes
The compressor needs a 12 volt source able to carry its 5.5 amp draw, so plan the power connection before mounting it. Use a fuse sized for that draw, and do not exceed the 150 PSI maximum air pressure.
What’s included
The package is the compressor itself, without hoses, mounting brackets, valves or a power cable. Plan to source those parts separately.















