Overview
The Omix-ADA 18670.29 is a Dana 18 transfer case shift lever pivot pin for Jeep CJ3, CJ5 and CJ6 models and Willys CJ-2, CJ-3, CJ-5 and CJ-6 models.
The pin is the pivot for the shift lever on the Dana 18 transfer case. It is built to the original factory specifications and comes with a limited five year warranty.
Key features
- Pivot pin for the Dana 18 transfer case shift lever
- Built to the original factory specifications.
- Limited five year warranty mentioned by the brand
- Fitment list covers CJ3, CJ5, CJ6 and Willys CJ models
Pivot pin wear and related parts
The pivot pin lets the shift lever swing on the transfer case, so it carries the load each time the lever is moved. A worn pin can cause play at the lever, sloppy shifts or a lever that sits out of position. Look for side-to-side movement at the lever and for wear marks on the pin when you open the shifter area.
Pivot pins often wear alongside the lever bushings and the shift linkage fasteners, so inspect those at the same time. Keep the pin lightly lubricated to reduce friction and corrosion, and wipe off excess grease so it does not attract dirt. If the lever has been bent or the pivot hole is elongated, replace the affected parts rather than adding shims or spacers. Taking a few minutes to check these parts during a rebuild saves a second trip apart later.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18670.29 |
| UPC | 804314068875 |
| Part type | Shift lever pivot pin |
| Transfer case | Dana 18 |
Vehicle fitment
The manufacturer fitment list includes 1959–1960 and 1966 Jeep CJ3 (Base), 1959–1960 and 1966–1971 CJ5 (Base), 1959–1960 and 1966–1971 CJ6 (Base), 1946–1949 Willys CJ-2, 1949–1958 Willys CJ-3, 1955–1958 Willys CJ-5 and 1956–1958 Willys CJ-6.
Jeep CJ7 and Wrangler models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only the pivot pin is described, with no other included parts named.









