Overview
The Omix-ADA 18203.01 is a heavy-duty replacement shock for Jeep CJ and Willys models, fitting years from 1941 to 1981. It is a gas charged, stock length shock with a 0 in. lift or drop, so it replaces the original damper without changing ride height.
The position is front. Match it to the shock you are replacing before ordering.
Key features
- Heavy-duty shock built for replacement use
- Stock length with 0 in. lift or drop
- Gas charged damping
- Direct fit for the listed CJ and Willys models
- It carries a limited five year warranty.
Replacing an old CJ damper
On a CJ or Willys, the front shock works with leaf springs and a solid axle, so it controls rebound and body motion over ruts and on washboard trails. A worn unit can let the front end bounce, bottom out on rough ground and wander at highway speeds. Gas charged designs help keep damping steady as the shock warms up, which matters on long grades and on trails where the shock works hard for an extended time. Before ordering, compare the eye and stud sizes of the original shock with the new one, since older Jeep front ends used varying mounting ends. Check the front bushings and frame brackets while the old shock is off, because worn hardware can make a new shock feel loose. Replacing both front shocks together keeps the steering balanced.
- Compare mounting eye sizes with the old shock
- Inspect bushings and frame brackets while the shock is off
- Look for oil on the body or a clunk over ruts
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18203.01 |
| UPC | 804314047122 |
| Position | Front |
| Shock series | Replacement |
| Fitment type | Direct fit |
| Lift or drop | 0 in. |
| Charge type | Gas charged |
| Length | Stock length |
| Warranty | Limited five year warranty |
Vehicle fitment
It fits the 1956–1964 Jeep 6-226 (Base), 1959–1960 Jeep CJ3 (Base), 1959–1960 and 1966–1981 Jeep CJ5 (Base, Golden Eagle, Laredo, Renegade), 1959–1960 and 1966–1975 Jeep CJ6 (Base), 1976–1981 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Renegade), 1981 Jeep Scrambler (Base), 1946–1949 Jeep Willys CJ-2, 1949–1958 Jeep Willys CJ-3, 1955–1958 Jeep Willys CJ-5, 1956–1958 Jeep Willys CJ-6 and 1941–1942 Willys MB (Base).
The list ends with 1981 for CJ7 and Scrambler models, so later CJ and Wrangler vehicles are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
It is sold as a single replacement shock. Confirm the package contents against your installation before starting, including any mounting hardware or bushings you may need.









