Overview
The Omix-ADA 16719.06 is a brake master cylinder for drum-brake Jeeps. It fits the 1972–1976 CJ5, the 1972–1975 CJ6 and the 1976 CJ7 as a direct bolt-on replacement.
Built to original Jeep specifications, this part comes with a five year limited warranty.
Key features
- Brake master cylinder for drum brakes
- Direct bolt-on replacement
- Limited five year manufacturers warranty
- Fits CJ5, CJ6 and CJ7
Drum brake master cylinder basics
On drum-brake CJs, the master cylinder works the same way as on disc systems, sending pressure through the lines to the wheel cylinders at each drum. Because drum shoes take up a little more travel than discs, a properly bled system and correct pedal height are important for a firm feel. Check the pedal height and free play after installation.
Look for signs the old cylinder is worn: a pedal that slowly sinks under steady pressure, fluid around the cylinder body or reservoir cap, or a pedal that feels soft after a long drive. Worn wheel cylinders and shoes can produce similar symptoms, so inspect them too.
When the cylinder is replaced, use fresh brake fluid of the type the system is designed for, and do not reuse old fluid. Clean the reservoir before filling and keep dirt out of the port openings during installation.
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16719.06 |
| Part type | Brake master cylinder |
| Brake type | Drum brakes |
| Type | Replacement |
| Fit style | Direct bolt-on |
| Warranty | Limited five year manufacturers warranty |
Vehicle fitment
It fits the 1972–1976 Jeep CJ5, the 1972–1975 Jeep CJ6 and the 1976 Jeep CJ7.
The 1977 and later CJ5 and CJ7 models are not covered. Check your vehicle’s year, model and trim against this fitment before ordering.









