Overview
The Omix-ADA 16719.03 is a brake master cylinder for early Jeeps. It fits the 1959–1960 and 1966 CJ3, CJ5 and CJ6, and the Willys CJ-2, CJ-3, CJ-5 and CJ-6. It retains the factory mounting hardware.
It is built to the original Jeep specifications and carries a limited five year warranty.
Key features
- Replacement brake master cylinder, direct fit
- Retains factory mounting hardware
- Limited five year manufacturers warranty
- Covers CJ3, CJ5, CJ6 and Willys models
Before fitting a master cylinder
The master cylinder sends hydraulic pressure from the pedal to the wheel cylinders or calipers, so it is one of the most important parts of the brake system. A replacement should be checked for correct bore, port placement, and reservoir fit before it goes on the vehicle. Bench bleeding the new unit before installation removes air and makes the first pedal feel firmer.
Pushrod length and the booster connection should be confirmed on any vehicle that has been modified or restored. Flush old fluid from the system and use the fluid type the brakes call for. Inspect the brake lines and fittings while the system is open, because a damaged line can leak fluid after a new cylinder is fitted.
Expect to bleed the system after installation, starting at the wheel farthest from the cylinder. Keep the reservoir topped up during bleeding so air does not return to the lines.
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16719.03 |
| Part type | Brake master cylinder |
| Type | Replacement |
| Fit style | Direct fit |
| Warranty | Limited five year manufacturers warranty |
Vehicle fitment
It fits the 1959–1960 and 1966 Jeep CJ3, CJ5 and CJ6, the 1949 Willys CJ-2, the 1949–1958 Willys CJ-3, the 1955–1958 Willys CJ-5 and the 1956–1958 Willys CJ-6.
The 1967 and later CJ5 and CJ6 years, and the CJ7, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The 16719.03 retains the factory mounting hardware, so the original bolts and brackets are reused.









