Overview
The Crown Automotive D3044YOKEUBK is a Dana 30/44 U-bolt style pinion yoke kit that converts the pinion end to a U-bolt style yoke. The kit includes a U-bolt type yoke, flange nut, 2 U-bolts with washers and nuts, and an oil seal.
Dana 30 and Dana 44 are axle names, so no vehicles, years or models are confirmed. The kit is marked universal fit, but the yoke is sized for Dana 30/44 axles, so it is not a universal part.
Key features
- Converts to a U-bolt style yoke
- Includes flange nut, U-bolts, washers, nuts and oil seal
- Labeled for Dana 30/44 axles
- Crown Automotive part number D3044YOKEUBK
Setting pinion preload
Setting pinion preload is the step that decides how long the new yoke and bearings last. Tighten the flange nut in small steps, turning the pinion to check rotating drag against the old reading, and stop once it is within the range for your axle.
A U-bolt yoke clamps to the pinion shaft with its own hardware, so the U-bolts should be snug before the flange nut is final. Once the driveline is back together, check the pinion angle against the transfer case and the front axle. An angle that is too steep causes vibration, and worn U-joints tend to follow. Recheck after the first few drives.
- Replace the oil seal whenever the flange is removed
- Use new U-bolt nuts rather than reusing old ones
- Check the U-joint for play before reassembly
- Recheck the flange nut after the first drive
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | D3044YOKEUBK |
| UPC | 848399078886 |
| Axle type | Dana 30/44 |
| Yoke style | U-bolt style |
| Included | U-bolt type yoke, flange nut, 2 U-bolts with washers and nuts, oil seal |
Vehicle fitment
Marked universal fit, but the kit is for Dana 30/44 axles. No vehicle years or models are named, so the axle housing decides fitment.
Match the axle housing to the kit before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the pinion bearing preload and check the driveline angle once the flange nut is torqued.
What’s included
The kit includes a U-bolt type yoke, flange nut, 2 U-bolts with washers and nuts, and an oil seal.









