Overview
The Moog ES3625 is a driver side front outer tie rod end for 2003–2008 Dodge Ram 1500, 2500 and 3500 trucks. It is made for steering linkages that have a tapered hole in the drag link for mounting a steering damper.
Moog says tie rods carry steering movement to the steering arm or spindle and are important to alignment. The ES3625 follows the company’s forged one-piece design instead of a two-piece assembly, has a neoprene-sealed rubber dust boot, and uses hardened full-ball metal studs. Moog adds that the boot resists extreme temperatures and abrasion and includes a small valve for flushing old grease.
The tapered drag link hole is the key detail for this part. It marks linkages where a steering damper bolts to the drag link. The ES3625 covers Ram 1500, 2500 and 3500 trucks, including the Power Wagon, so one part number serves several heavy-duty Dodge trucks that share this linkage design.
Key features
- Driver side
- For linkages with a tapered hole in the drag link for steering damper mounting
- Forged one-piece unit
- Neoprene-sealed rubber dust boot
- Hardened full-ball metal studs
- Direct fit
Steering damper and drag link care
A steering damper is bolted to the drag link, so the drag link and its mounting points carry real steering loads on a heavy truck. Before fitting a new tie rod end, inspect the damper bushings, the damper mounts and the drag link for cracks, bent metal or looseness. A worn damper can make the steering feel vague and places extra strain on new joints.
On trucks with a tapered drag link hole, a loose or misaligned steering damper can wear a tie rod end faster than normal. Look for play at the wheel, uneven tire wear and any clunking over rough ground. Replacing worn damper hardware at the same time as the tie rod end helps the new joint last.
- Looseness at the damper mounts
- Cracks or bends in the drag link
- Worn damper bushings
- Uneven tire wear across the front axle
Specifications
| Brand | Moog |
|---|---|
| Part number | ES3625 |
| Product | Front outer tie rod end |
| Side | Driver side |
| Linkage note | Tapered hole in the drag link for steering damper mounting |
| Construction | Forged one-piece unit |
| Dust boot | Neoprene-sealed rubber |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2003–2008 Dodge Ram 1500 (Laramie, SLT, SRT-10, ST, SXT, Sport and TRX4), the 2003–2008 Dodge Ram 2500, including the Power Wagon, and the 2003–2008 Dodge Ram 3500.
The part is for the driver side and for linkages with the tapered drag link hole, so passenger side parts and later Ram trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the drag link for the tapered hole used for steering damper mounting before choosing this part, and have the truck aligned after the tie rod end is replaced, as Moog advises. The tie rod end is a forged one-piece unit, so it cannot be taken apart or serviced in pieces.










