Overview
The Moog DS1464 is an inner tie rod end for the 2006–2008 Dodge Ram 1500 and the 2003–2008 Dodge Ram 2500 and 3500. It attaches at the connecting tie rod and is the first design of this part, made for linkages with a tapered drag link hole for steering damper mounting.
Moog treats the tie rod as a key steering component, since movement passes from the steering rack through the tie rods to the steering arm or spindle, and says tie rods are also important to alignment. Moog builds its tie rod ends as forged one-piece units to avoid the wear that two-piece original assemblies can suffer, and finishes them with a neoprene-sealed rubber dust boot and hardened full-ball metal studs.
The tapered hole in the drag link is used for steering damper mounting, so this part suits trucks with a damper mounted that way.
Moog gives the part a boot with a small valve that allows old grease and contaminants to be flushed out, so the joint can be serviced.
Key features
- Inner tie rod end that attaches at the connecting tie rod
- First design
- For linkages with a tapered drag link hole for the steering damper
- Forged one-piece unit
- Neoprene-sealed rubber dust boot
- Hardened full-ball metal studs
Tie rod and alignment
Inner tie rod ends carry steering motion from the rack to the steering arm and affect the alignment of the front wheels. A worn inner end can cause wandering, loose steering and uneven tire wear on the inside edge of the tire. Because the joint is hidden behind the boot, a torn boot is often the first sign of trouble, and grit that enters the joint speeds wear.
Replacing an inner tie rod changes toe, so an alignment should follow the work. It is also sensible to inspect the outer tie rod ends and the drag link at the same time. Confirm the truck has the tapered damper hole and the first design of the part before fitting it.
- Check the boot for cracks before installing
- Inspect the outer tie rod ends too
- Get an alignment after replacement
Specifications
| Brand | Moog |
|---|---|
| Part number | DS1464 |
| Product | Inner tie rod end |
| Location | At connecting tie rod |
| Design version | First design |
| Linkage note | Tapered hole in the drag link for steering damper mounting |
| Construction | Forged one-piece unit |
| Dust boot | Neoprene-sealed rubber |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2006–2008 Dodge Ram 1500 (Laramie, SLT, SRT-10, ST, SXT, Sport and TRX4), the 2003–2008 Dodge Ram 2500 (including Power Wagon) and the 2003–2008 Dodge Ram 3500.
The part is the first design only, and a second-design inner tie rod end exists, so 2003–2005 Ram 1500 trucks and later Ram models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Moog suggests an alignment as soon as tie rods are replaced. Confirm that the truck has the tapered drag link hole for the steering damper and the first design of this part.










