Overview
The Mag-Hytec Ford 9.75-inch high capacity cover (part number 12-9.75) is a rear differential cover for Ford 9.75-inch rear axles. It holds 2.25 extra quarts, which brings the total to 5 quarts, and it stands 3 1/2 inches tall overall.
The cover is cast from A356-T6 aluminum and powder coated black, with machined cooling fins that help shed heat from the oil. The cover can be serviced without being removed.
The cover suits hard-working recreational and service vehicles, where extra lubricant and cooling capacity matter. The 2.25 extra quarts are the figure to plan around when refilling.
Finned aluminum adds surface area for cooling, and the magnetic drain plug traps worn gear material to help keep the fluid clean.
All hardware is 303 stainless steel, and the cover is fitted with ARP 568 O-rings for sealing.
Key features
- Finned aircraft aluminum housing for improved cooling
- Machined cooling fins
- Magnetic drain plug traps worn gear material
- Dipstick with magnetic insert
- Routine maintenance without removing the cover
Checking the fluid level
Rear differential fluid is easiest to manage when the level is checked on a regular schedule, especially after towing or hard use. Because the cover holds extra fluid, the level can be harder to judge at a glance, so check the dipstick with the vehicle on level ground and the fluid settled. Note the level each time so a slow loss shows up early.
Use the fluid type the axle requires and avoid mixing products. Clean the cover’s fins before a long trip so they can shed heat, and inspect the O-rings and fasteners each time the cover is removed. Magnetic plugs and inserts collect fine metal, so clean them during every service and note any heavy buildup as a sign of wear. Keep a simple service log with dates and mileage.
- Check the level on level ground
- Clean the magnetic plug at each service
- Look for seepage around the cover edge
Specifications
| Brand | Mag-Hytec |
|---|---|
| Part number | 12-9.75 |
| Axle location | Rear |
| Axle type | Ford 9.75 inches |
| Material | A356-T6 aluminum, with 303 stainless steel hardware |
| Oil capacity | 2.25 extra quarts, 5 quarts total |
| Overall height | 3 1/2 inches |
| Finish | Black powder coat |
| Warranty | Lifetime limited (Mag-Hytec) |
Vehicle fitment
This cover is sized for Ford 9.75-inch rear axles. The cover is matched to the axle housing, not to a vehicle year, so check the axle size first.
Installation notes
Mag-Hytec says most installations need neither a gasket nor sealant, and the cover is sealed with ARP 568 O-rings.









