Overview
The Mag-Hytec differential cover is an A356-T6 aluminum rear cover for a 14 bolt, 11.5-inch differential. It fits 2014 to 2017 Dodge 2500 trucks with rear coil springs or air bags.
The cover has 12 bolt holes because the top and bottom bolt positions were removed to clear the drain plug and temperature sending unit hole. The finish is powder coated black, and the kit includes a bolt kit, gasket, drain plug and dip stick.
Key features
- A356-T6 aluminum construction
- Powder coated black finish
- Built for a 14 bolt, 11.5-inch differential
- Top and bottom bolt positions removed for the drain plug and temperature sending unit hole
- Includes bolt kit, gasket, drain plug and dip stick
Checking the axle before installing
A differential cover protects the gears and holds the oil, so the seal and the bolt pattern both matter. Confirm the axle is the 14 bolt, 11.5-inch unit before buying, because the cover has 12 bolt holes and is only correct for that pattern. Look at the housing flange and the bolt holes for damage before fitting the new cover.
Aluminum is lighter to handle during a cover swap, and the powder coat can chip during handling, so protect the finish when you set the cover aside. Use the included gasket, drain the oil first, and refill to level after the cover is in place.
- Gasket face clean and free of old sealant
- Drain plug and temperature sensor hole checked
- Bolt pattern matched to the 14 bolt axle
Specifications
| Brand | Mag-Hytec |
|---|---|
| UPC | 700007934581 |
| Material | A356-T6 aluminum |
| Finish | Powder coated black |
| Differential | 14 bolt, 11.5-inch |
| Bolt holes | 12 |
| Axle location | Rear |
| Oil capacity | Standard capacity |
| Included | Bolt kit, gasket, drain plug, dip stick |
| Fitment | Universal Fit |
Vehicle fitment
It fits 2014 to 2017 Dodge 2500 trucks with rear coil springs or air bags. Because the cover is sized to a 14 bolt, 11.5-inch rear differential, confirm your axle matches before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan to drain the gear oil before removing the old cover, and use the included gasket when the new cover goes on.
What’s included
The kit includes a bolt kit, gasket, drain plug and dip stick.









