Overview
The Mag-Hytec differential cover is made from A356-T6 aluminum with a powder coated black finish. It fits 2003 to 2013 Dodge 2500 and 2003 to 2012 Dodge 3500 trucks.
The cover was modified to fit both modified and stock Dodge trucks. Some modification may still be needed to clear steering components, so check clearance before installation.
Key features
- A356-T6 aluminum construction
- Powder coated black finish
- Modified to fit modified and stock Dodge trucks
- Includes bolt kit, gasket, drain plug and dip stick
Preparing for the swap
A differential cover mainly seals the axle housing and keeps gear oil in place, so its fit and sealing surface matter as much as its strength. Before pulling the old cover, drain the gear oil into a clean pan and check the fluid for metal flakes or a milky look, which can point to wear inside the housing. Clean the mating surface thoroughly so the new gasket seats evenly.
Aluminum covers weigh less than steel ones and shed heat well, which suits trucks that carry gear through hard use, but they can dent if struck. If your truck has steering components close to the cover, mark their positions and check clearance by hand before the cover is fully bolted in.
- Refill to the level on the housing after the cover is in place
- Replace the gasket rather than reusing an old one
- Torque the bolts evenly in a crisscross pattern
Specifications
| Brand | Mag-Hytec |
|---|---|
| UPC | 70000659768 |
| Material | A356-T6 aluminum |
| Finish | Powder coated black |
| Oil capacity | Standard capacity |
| Included | Bolt kit, gasket, drain plug, dip stick |
| Fitment | Universal Fit |
Vehicle fitment
It fits 2003 to 2013 Dodge 2500 and 2003 to 2012 Dodge 3500 trucks. Steering components may need modification to clear the cover on stock and modified trucks, so check clearance before installation.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check steering component clearance before installing. Drain the gear oil before removing the cover.
What’s included
Bolt kit, gasket, drain plug and dip stick are included.









