Select your vehicle

Low Range Offroad 6″ Stainless Steel Brake Line Kit (Stainless Steel) – TAC-B-KIT-9504-6

Low Range Offroad

Shop Toyota Tacoma Brake Hoses on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 4-hose front and rear stainless brake kit for 1995–2004 Toyota Tacoma
  • 6 inches longer than stock; Kevlar reinforced, Teflon inner core
  • DOT approved; works with all brake fluids; hardware included

Description

Overview

The Low Range Offroad TAC-B-KIT-9504-6 is a four-hose front and rear stainless steel brake line kit, 6 inches longer than stock, for the 1995–2004 Toyota Tacoma.

The hoses are built with five-layer stainless steel construction, Kevlar reinforcement and a Teflon inner core designed to limit internal friction and volumetric expansion. The kit is an OEM replacement, works with all brake fluids and is DOT approved. The fittings are one-piece steel.

Key features

  • Four hoses total: front and rear
  • 6 inches longer than stock
  • Five-layer stainless steel hoses with Kevlar reinforcement
  • Teflon inner core hose
  • One-piece steel fittings
  • DOT approved
  • Compatible with all brake fluids
  • OEM replacement with hardware included

Before you install brake lines

Brake hoses carry pressure from the master cylinder to the wheels, and a new hose has to flex with suspension travel without rubbing or kinking. Changes in length can shift the route of the hoses, so check each line’s path against the frame, springs and tires before tightening the fittings. Routing hoses away from heat, sharp edges and moving parts helps them last.

Stainless braided lines resist swelling better than rubber hoses, which helps keep the pedal firm once the system is bled. Bleed the system fully after installing new lines, check the fittings for leaks, and test the brakes at low speed in an open area. Use fresh brake fluid suited to the system.

  • Check hose length at full suspension travel
  • Keep lines clear of exhaust and sharp edges
  • Bleed all four corners after installation
  • Inspect fittings for seepage after the first drive

Specifications

Brand Low Range Offroad
Part number TAC-B-KIT-9504-6
Type Stainless steel brake line kit
Pieces 4 hoses (front and rear)
Added length 6 inches over stock
Construction Five-layer stainless steel, Kevlar reinforced
Inner core Teflon
Fittings One-piece steel
Fitment type Direct fit
Standard DOT approved

Vehicle fitment

It is a direct fit for the 1995–2004 Toyota Tacoma.

Tacomas built from 2005 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The added length matches the number of inches over stock, so this 6 inch kit adds 6 inches to the original hose length. Everything shown with the kit is included.

What’s included

Four brake hoses (fronts and rears) and all the hardware shown with the kit.

SKU: LROTAC-B-KIT-9504-6 Categories: , ,

Fitment

VehicleYearsTrims
Toyota Tacoma1995–2004Base, DLX, Limited, Pre Runner, S-Runner, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Tacoma years does the TAC-B-KIT-9504-6 fit?

The kit fits the 1995–2004 Toyota Tacoma. It has four hoses in total, for the front and rear brakes, each 6 inches longer than stock.

How many hoses are in the kit?

The kit has four hoses in total, covering the front and the rear. Each is 6 inches longer than the stock hose.

Can the hoses be used with any brake fluid?

Yes. Low Range Offroad says these DOT approved brake hoses are compatible with all brake fluids. The hoses are Kevlar reinforced with a Teflon inner core and one-piece steel fittings.

How often should brake hoses be inspected?

Check brake hoses at every tire rotation or service interval. Look for cracks, bulges, chafing, or fluid seepage at the fittings. Any sign of damage means the line should be replaced before the vehicle is driven again.

Do longer brake lines change pedal feel?

Length alone has little effect on pedal feel, but hose material and proper bleeding do. Stainless hoses resist expansion, so the pedal feels firmer when the system is fully bled and has no air trapped in it.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Brake Hoses on Amazon