Overview
The Crown Automotive 52060045AE is a rubber front brake hose for the driver side of the 2007–2010 Jeep Wrangler (JK), in 2-door and 4-door models. It is listed at the front left position.
Key features
- Front left (driver side) position
- For 2-door and 4-door models
- Rubber hose
- Stock length
- Direct-fit replacement
Pairing hoses and bleeding
Brake hoses in a pair are often kept in matched condition, so when one side fails, look at the opposite hose and its fittings before deciding it is safe. Rubber can harden on the driver side as easily as the passenger side, depending on heat from the exhaust and exposure to road spray. Compare both hoses for stiffness, surface cracks and fluid staining, then decide whether the second one should be replaced at the same service.
When bleeding the system after a hose change, work from the caliper farthest from the master cylinder toward the nearest one, and keep the reservoir topped up so air does not enter the line. Discard fluid that has been drained rather than reusing it, and keep brake fluid off painted surfaces. Route the new hose so it clears the steering components and the wheel at full turn, then check that the pedal feels firm before the vehicle moves.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52060045AE |
| UPC | 848399038644 |
| Position | Front left (driver side) |
| Type | Rubber |
| Length | Stock |
| Size | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It fits the 2007–2010 Jeep Wrangler (JK), both 2-door and 4-door. The matching passenger side hose is Crown part number 52060044AE.
JK years from 2011 are not covered by this hose. Make sure your year, model and trim match before ordering.








