Overview
The Crown Automotive 52128430AC is a rear brake hose for the passenger side of the Jeep Wrangler (LJ) from 2004–2005 and the Wrangler (TJ) from 2003–2006, for models with rear disc brakes. It is made of rubber and steel.
Key features
- Passenger side rear with disc brakes
- Rubber and steel construction
- Rear right position
- Stock length
- Direct-fit replacement
Rear brake hose maintenance
A flexible rear brake hose carries fluid from the steel line to the caliper, and it moves with the axle as the suspension cycles. Over time the rubber can crack, swell or harden, and the inner lining can break down. Any of these changes can restrict flow or cause a leak, which reduces braking response at that wheel.
Inspect the hose at every tire rotation or brake service. Look for cracks along the outer cover, bulges, seepage at the fittings and any spot where the hose rubs against a bracket or spring. A hose that shows any of these signs should be replaced rather than patched.
When replacing a hose, use new copper washers at banjo fittings and tighten the fittings without overtightening. Bleed the brakes afterward so no air remains in the system, and test the pedal before driving.
- Check for cracks along the outer cover
- Look for bulges and seepage at the fittings
- Bleed the brakes after replacement
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52128430AC |
| UPC | 848399040784 |
| Position | Rear right (passenger side) |
| Brake system | Rear disc |
| Material | Rubber and steel |
| Length | Stock |
| Size | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It fits the 2004–2005 Jeep Wrangler (LJ) and the 2003–2006 Jeep Wrangler (TJ) at the rear right position.
The 1997–2002 TJ years, the YJ and the JK fall outside this fit. Check your year, model and trim before ordering.









