Overview
The Jeep front brake hose, part number 68184809AC, is a factory replacement hose for the driver side front position. It takes the place of the original front brake hose.
Brake hose inspection
Flexible brake hoses connect the steel brake lines to the caliper, so they must move with suspension travel and steering. Over time the rubber can crack, swell, or chafe where it rubs near a bracket, and the inner lining can deteriorate and restrict fluid flow.
Check the hose ends for leaks, seeping fluid, and rust where the fitting meets the line. Bulging or soft spots under pressure are a sign the hose should be replaced. Hoses are often replaced in pairs on the same axle so both front brakes age the same way.
Brake hoses should be replaced with the correct length and fitting type, and the new hose should sit clear of the tire, steering components, and exhaust heat. After replacing a hose, bleed the brakes to remove trapped air and check the pedal feel before driving.
- Check for cracks and swelling
- Inspect the fittings for leaks
- Keep the hose clear of moving parts
- Bleed the system after replacement
Specifications
| Brand | Jeep |
|---|---|
| Part number | 68184809AC |
| UPC | 700008345921 |
| Position | Driver side front |
The spec labels include the words 6 Inches and Rubber, but their layout is unclear, so confirm the length and hose material against the original part.
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the routing and end fittings with your original hose before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one driver side front replacement hose.








