Select your vehicle
-13%

Pro Comp Brake Hose Kit

Pro Comp Suspension

Shop Toyota Tacoma Brake Hoses on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1996–2004 Toyota Tacoma
  • Stainless braided front left, front right and rear hoses
  • For 4 to 6 inch lifts
  • Complies with D.O.T. specifications

Description

Overview

The Pro Comp 7213 is a stainless steel braided brake hose kit for the 1996–2004 Toyota Tacoma with 4 to 6 inches of lift. It is designed to replace stock rubber hoses on vehicles with increased ride heights and is packaged as a complete kit.

Key features

  • Stainless steel braid
  • Front left and front right hoses, 25.25 inch each
  • Rear hose, 24 inch
  • For 4 to 6 inch lifts
  • Complies with D.O.T. specifications
  • Packaged as a complete kit

Braided lines and braking

Brake hoses carry fluid from the chassis lines to the calipers or wheel cylinders, and they flex constantly as the suspension moves. On a lifted truck the hoses travel through a longer arc at full droop, so their length and routing matter as much as the material. Rubber hoses can swell under pressure and lose firmness with age, which is why braided lines are often chosen for trucks running larger tires.

Replacing hoses works best as a full set, so front and rear lines age at the same rate. Check that each hose clears the frame, springs and steering parts through full travel, and that the fitting washers seal cleanly. After installation, bleed the brakes and test the pedal at low speed before driving normally.

  • Inspect each fitting for cracks, bulges or seepage
  • Look for chafing where a hose rubs a frame edge
  • Replace hoses as a set when one shows wear

Specifications

Brand Pro Comp Suspension
Part number 7213
UPC 614901180114
Type Stainless steel braid
Front left hose 25.25 inch
Front right hose 25.25 inch
Rear hose 24 inch
Lift range 4 inches to 6 inches
Length class Lifted
Fit Direct fit

Vehicle fitment

It fits the 1996–2004 Toyota Tacoma.

Confirm fit for your vehicle’s year, model and trim before ordering. Check that your lift falls within 4 to 6 inches.

Installation notes

Pro Comp says steel braided lines do not swell under the increased braking pressure demanded by larger tires, which is why they are paired with lifted trucks.

What’s included

Complete kit with front left, front right and rear brake hoses.

SKU: EXP7213 Category:

Specification

Shipping weight 1.13 lbs
Package dimensions 20.00 × 6.00 × 2.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma1996–2004Base, Limited, Pre Runner, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Tacomas does the Pro Comp 7213 fit?

It fits the 1996–2004 Toyota Tacoma. It is a complete braided stainless steel hose kit for Tacomas with 4 to 6 inches of lift.

What hoses are in the 7213 kit?

It includes a front left hose and a front right hose, each 25.25 inch, and a 24 inch rear hose, all with stainless steel braid, packaged as one complete kit.

Does the 7213 meet D.O.T. specifications?

Yes. The hoses comply with D.O.T. specifications and come as one complete kit. Their stainless steel braid resists swelling under the higher braking pressure of larger tires.

How do I know when brake hoses need replacing?

Look for cracks, bulges, soft spots when the pedal is pressed, or fluid seeping at the fittings. Any of these signs means the hose should be replaced rather than patched.

Should the brake fluid be changed when hoses are replaced?

Usually yes. The hydraulic system is opened during installation, so air can enter the lines. Bleed the brakes fully so no air remains before driving.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Brake Hoses on Amazon