Overview
The King Shocks 25001-119 is a front remote reservoir coilover from the King 2.5 OEM Performance Series. It fits the 2005 to 2019 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road and TRD Sport trims. It has a 2.5-inch body, an OEM top mount, an eyelet bottom mount and gas charged construction.
The kits are bolt-on upgrades tuned through real-world testing to set the damping curves and spring rates for each vehicle. The front kits offer adjustable ride height and up to 25 percent more wheel travel, and they can be installed at stock height or with custom length rod ends for a lifted suspension.
The 2.5-inch shock bodies use external reservoirs, which increase fluid capacity and heat dissipation for steady damping under hard use. The valves can be adjusted with simple hand tools, using a serviceable design.
Key features
- 2.5-inch shock body with external reservoir
- Adjustable front ride height
- Up to 25 percent more front wheel travel
- Valve adjustment with simple hand tools
- Serviceable, rebuildable design
- Custom length rod end option for lifted suspensions
Coilover setup and ride height
A coilover combines the spring and shock into one unit, so the ride height and damping are set together. On a front Tacoma, the spring rate and shock valving work as a pair, which is why the kit is tuned for each vehicle. Changing ride height on a coilover usually means adjusting the spring seat or the preload, so measure before and after each change.
The eyelet bottom mount and OEM top mount should be inspected for wear, and the rod ends should move freely with no play. Because the external reservoir is mounted away from the shock body, check its hose and clamp for rubbing against the frame or tire. Re-torque the mounting hardware after the first few drives.
- Measure ride height before and after changes
- Inspect rod ends for free movement
- Check reservoir hose routing
- Re-torque hardware after initial use
Specifications
| Brand | King Shocks |
|---|---|
| Part number | KST25001-119 |
| Shock series | King OEM Performance Series 2.5 |
| Shock type | Coilover reservoir |
| Body diameter | 2.5 inches |
| Top mount | OEM |
| Bottom mount | Eyelet |
| Location | Front |
| Hydraulic or gas charged | Gas charged |
| Fitment type | Direct fit |
| Vehicle | Toyota Tacoma, 2005 to 2019 |
Vehicle fitment
The trims covered are Base, Limited, Pre Runner, SR, SR5, TRD Off-Road and TRD Sport, all from the 2005 to 2019 Tacoma.
The TRD Pro and Trail trims are not on this list, and later Tacoma generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit bolts in with no cutting or welding to the vehicle. Stock-height and custom length rod end versions are available for lifted suspensions.
What’s included
The kit is complete. Check the package contents against your installation before fitting, including the hardware.









