Overview
The FOX985-24-177 is a front 2.0 Performance Series smooth body IFP monotube shock kit for the 2020 to 2026 Jeep Gladiator and the 2018 to 2026 Jeep Wrangler JL. It fits Gladiator 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport models, and Wrangler JL 2-door and Unlimited models in the trims named.
The design is race-proven and gives a comfortable on-road ride with handling that is predictable off road. The precision aluminum body increases cooling capacity and resists rust, and the high flow damping piston uses application-specific valving.
The IFP separates the shock oil from the nitrogen gas chamber, which prevents oil aeration so the factory-tuned valving works as designed. This is a front-position monotube shock kit with a gas charge.
Key features
- Front position
- Monotube shock kit
- Internal floating piston with nitrogen gas chamber
- Smooth aluminum body.
- Application-specific valving.
Front kits and installation
A front shock kit is useful when the whole front damping setup is being refreshed, since the shock, mounts and hardware are matched to one another. On a Gladiator or Wrangler JL, the front shocks control the steering and the weight shift under braking, so a worn set can make the front end feel loose or slow to recover over rough ground.
Before installation, compare the kit parts with the original front shock and check the mounting points. Front shock work often reveals worn bushings or bump stops, which should be replaced while the front end is apart. Have the front alignment checked after the job so the steering and tire wear stay even.
- Check the kit parts against the removed shock
- Inspect bushings and bump stops while the front is apart
- Re-check fasteners after the first few drives
- Have the front alignment checked afterward
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-24-177 |
| Series | 2.0 Performance Series |
| Position | Front |
| Shock type | Monotube shock kit |
| Charge | Gas charged |
| Body | Smooth body (per title) |
| Design | IFP |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020 to 2026 Jeep Gladiator in 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport models, and the 2018 to 2026 Jeep Wrangler (JL) in 2-door, Unlimited 4-door and the High Altitude, Rubicon 392, Rubicon 4xe and Sahara 4xe variants named.
The list covers Gladiator and Wrangler JL models only, in the years named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the mounts and length with the original front shock before fitting, and check the front alignment afterward. Work on a securely supported vehicle.
What’s included
One front monotube shock kit. Check the kit contents against your installation before starting.














