Overview
The King Shocks rear 2.5 adjustable piggyback reservoir shock absorber set, part number KST25001-385A, is for a 6 inch lift and fits the 2020 to 2026 Jeep Gladiator in the Launch Edition, Overland, Rubicon, Sport and Sport S trims. It has eyelet top and bottom mounts, a 2.5-inch body, a piggyback reservoir design, a rear location and gas charged construction.
King Shocks makes custom adjustable and rebuildable shock absorbers and performance racing products for utility vehicles, OEM replacement and professional racing. The company says its designs are refined through field testing with top racers, then measured on an electro-magnetic shock dyno that can run shaft speeds up to 120 inches per second with a drive position resolution of 1 micron.
The dyno replays racecourse data from common onboard automotive data acquisition systems and uses an infrared style, non-contacting transducer to track temperature. This lets engineers test closer to real-world conditions than a laboratory alone.
The OEM and UTV upgrade kits are bolt-on installs for stock vehicles or for vehicles with aftermarket lifts and long travel suspensions. Shocks are serviced with simple hand tools, and a seal kit can return a shock to factory fresh condition.
Key features
- Adjustable piggyback reservoir design
- Eyelet top and bottom mounts
- 2.5-inch body
- Valve adjustment with simple hand tools
- Seal kit service option.
- Designed for stock or lifted installations
Piggyback reservoirs explained
A piggyback reservoir sits beside the shock body and connects through a hose. The separate reservoir adds fluid capacity and helps the shock keep damping steady when it heats up on long climbs or rough trails. The trade-off is packaging: the reservoir and hose need clearance from the frame, tires and body, so check it before the wheels go back on.
Rear shocks on a Jeep take a lot of work from articulation and load. Check the hose routing after installation and again after the first trail outing, since the hose can rub if it is not secured. Inspect the eyelet bushings and mounting bolts at service intervals, and confirm the reservoir is firmly held so it does not shift.
- Check reservoir clearance at full articulation
- Secure the hose so it cannot rub
- Inspect eyelet bushings at service intervals
Specifications
| Brand | King Shocks |
|---|---|
| Part number | KST25001-385A |
| Shock series | 2.5 Piggyback Reservoir |
| Shock type | Piggyback |
| Body diameter | 2.5 inches |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Lift range | 6 inch lift. |
| Hydraulic or gas charged | Gas charged |
| Location | Rear |
| Fitment type | Direct fit |
| Vehicle | Jeep Gladiator, 2020 to 2026 |
Vehicle fitment
It fits the 2020 to 2026 Jeep Gladiator in the Launch Edition, Overland, Rubicon, Sport and Sport S trims.
Wrangler JL and earlier Gladiator years are not covered by this entry, and the front position uses a different King part. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the quantity and hardware against your installation before fitting.








