Overview
The ICON Vehicle Dynamics 44100 is a billet rear upper link arm kit for the 2021 to 2026 Ford Bronco. Rear upper links locate the axle fore and aft and set its pinion angle, and this kit replaces the factory upper links with CNC machined 6061 aluminum arms anodized for corrosion resistance.
The arms use PTFE-lined FK rod ends for more articulation and multi-durometer bushings designed to avoid the bushing bind of factory parts. The length adjusts on the vehicle with the double adjuster system, so the upper links can be set once installed.
Key features
- Rear upper position, CNC machined from 6061 aluminum
- Anodized finish for corrosion resistance
- Double adjuster system for on-vehicle length changes
- PTFE-lined FK rod ends for articulation
- Multi-durometer bushings for quiet operation with no greasing schedule
- Tested through ICON’s ICON1K real-world test cycle
Pinion angle and driveline
The upper links hold the axle against torque and keep the pinion at a set angle relative to the driveshaft. When the pinion angle drifts, the u-joints work outside their intended range, which can cause vibration and early joint wear. Changing upper link length is one of the most direct ways to alter that angle, so it should always be followed by a driveline check.
Plan for a measurement of pinion angle with a bubble gauge or inclinometer, and recheck after any change to suspension height, tire size or payload. Sway bar and track bar settings can also shift once the upper links are moved, so review those parts together. Greasing is not needed on the bushings, but the rod ends should be checked for free movement at each service interval.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO44100 |
| Position | Rear upper |
| Material | CNC machined 6061 aluminum, anodized |
| Rod ends | PTFE-lined FK |
| Bushings | Multi-durometer |
| Length adjustment | On vehicle, double adjuster system |
| Fitment type | Direct fit |
| Vehicle | Ford Bronco, 2021 to 2026 |
Vehicle fitment
It fits the 2021 to 2026 Ford Bronco in the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
Bronco model years 2023 and later, the Ford Bronco Sport and the Bronco Raptor are not on the list. Use the rear lower kit for the lower position, since this part is the upper link only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Upper link length sets axle pinion angle, so check driveline angles and alignment after the length is changed.
What’s included
The kit is the rear upper link arm set with PTFE-lined FK rod ends and multi-durometer bushings installed. Check the package contents against your installation before starting, including the mounting hardware.








