Overview
The ICON Vehicle Dynamics 44000 is a billet rear lower link arm kit for the 2021 to 2026 Ford Bronco. It replaces the factory rear lower links with CNC machined 6061 aluminum arms that are anodized for corrosion resistance and can be adjusted in length on the vehicle.
The arms use PTFE-lined FK rod ends and multi-durometer bushings. The rod ends allow more suspension articulation, and the bushings are designed to run without the bind found in factory links. Arm length is changed on the vehicle with the double adjuster system, so the links can be set after installation.
Key features
- CNC machined 6061 aluminum links, anodized for corrosion resistance
- On-vehicle length adjustment with ICON’s double adjuster system
- PTFE-lined FK rod ends for suspension articulation
- Multi-durometer bushings that run quietly and need no periodic greasing
- Replaceable nylon rock sliders to reduce trail hang-ups
- Engineered and checked through ICON’s ICON1K real-world test cycle
Setting rear link length
Rear lower links control how the axle moves fore and aft under load and under braking, so changing their length changes axle position and pinion angle. Lengthening or shortening one side without the other can also introduce axle twist, which shows up as uneven tire wear or driveline vibration. Make small, equal adjustments and measure before and after each change.
Length changes are easiest to get right with a helper, a marked reference point on the axle and a way to check the driveline at highway speed. Inspect the rod ends and bushings after the first few trail sessions, looking for play or torn boots. Keep a written record of the setting so that future adjustments start from a known point.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO44000 |
| Position | Rear lower |
| Material | CNC machined 6061 aluminum, anodized |
| Rod ends | PTFE-lined FK |
| Bushings | Multi-durometer |
| Length adjustment | On vehicle, double adjuster system |
| Rock sliders | Replaceable nylon |
| Fitment type | Direct fit |
| Vehicle | Ford Bronco, 2021 to 2026 |
Vehicle fitment
It fits the 2021 to 2026 Ford Bronco in the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
Bronco model years from 2023 onward and the Ford Bronco Sport are not on the list, and the Bronco Raptor is not among the listed trims. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing link length alters rear suspension geometry, so set the adjusters and then check alignment and driveline angles after installation.
What’s included
The kit includes the rear lower link arms with PTFE-lined FK rod ends and multi-durometer bushings, installed. Check the package contents against your installation before starting, including the mounting hardware and the replacement rock sliders.








