Overview
The ARB Rear Lower Trailing Arm LTA3043 is a heavy load trailing arm for the 1990–2007 Toyota Land Cruiser (Base). Trailing arms locate the rear axle fore and aft. It is intended for raised vehicles that need axle location and geometry reset.
The arm is made from high strength 4140 alloy steel with a black powder coat for corrosion protection. Premium bushing technology is built in.
Key features
- Heavy load rating
- Rear lower trailing arm position
- High strength 4140 alloy steel construction
- Black powder coat finish for corrosion protection
- Premium bushing technology
- Direct fit per the manufacturer fitment list
Signs the trailing arm needs attention
Trailing arms hold the rear axle in place fore and aft, so worn parts show up as movement rather than noise alone. A clunk over bumps, a rear axle that shifts under braking, or uneven rear tire wear can all point to a worn arm or bushing. Inspect the arm, bushing and mounting points when the vehicle is raised for other work.
Heavy use on rough tracks puts extra load on the bushings and the mounting bolts. Check the fasteners at regular service intervals and re-check the bolts after the first drives on a new arm. Any change to the arm usually means checking pinion angle and alignment again, since those depend on the arm position.
- Check bushings for splits or cracking
- Look for loose or stretched mounting bolts
- Recheck alignment after any arm replacement
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | LTA3043 |
| UPC | 9332018019189 |
| Position | Rear, lower |
| Type | Trailing arm |
| Load rating | Heavy load |
| Material | High strength 4140 alloy steel |
| Finish | Black powder coat |
| Bushings | Premium bushing technology |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 1990–2007 Toyota Land Cruiser (Base).
Other Land Cruiser years, trims and models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Trailing arms set the axle’s fore and aft position, so check pinion and driveline angles after fitting. Check alignment at ride height as well.
What’s included
Mounting hardware is not included. Check the package contents against your installation before starting.





