Overview
The ARB UTA3036 is a rear upper trailing arm from ARB 4×4 Accessories with 40mm of on-vehicle adjustability. It belongs to the Old Man Emu geometry alignment line and is designed for raised vehicles where axle location and geometry need to be reset.
It is built from 4140 alloy steel with a black powder coat finish and bushing technology. Confirm the arm suits your axle and lift height before choosing it.
Key features
- Adjustable, with 40mm on-vehicle adjustability
- 4140 alloy steel construction
- Black powder coat finish for corrosion protection
- Premium bushing technology
- Recommended for raised vehicles to reset axle location and geometry
Trailing arms and axle control
Trailing arms control fore-aft axle location and carry braking and acceleration forces into the frame. On a lifted vehicle the arms run at a steeper angle, which is why many builds add adjustable arms to bring the axle back into a workable position. Worn bushings and bent arms show up as clunks, wandering over bumps or uneven rear tire wear.
When choosing an adjustable arm, match its length range to the lift and check that the mounting points clear the frame, shocks and brake lines. Pinion angle is the usual companion check, and a driveshaft that binds or vibrates after a change should be inspected. Replace worn bushings as a set so both sides of the axle stay consistent. Grease the pivots as the design allows, and inspect the welds and bushing sleeves after rough trail use.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | UTA3036 |
| UPC | 9332018019172 |
| Position | Rear upper |
| Adjustability | 40mm on-vehicle adjustability |
| Material | 4140 alloy steel |
| Finish | Black powder coat |
| Bushings | Premium bushing technology |
| Product line | Old Man Emu geometry alignment components |
Vehicle fitment
Confirm fit for your axle, lift height and vehicle year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing trailing arm length alters axle location and pinion angle, so an alignment and driveline angle check is a sensible step after installation. Support the vehicle securely while working on suspension components.
What’s included
The package is a single rear upper trailing arm.
Not included: Check the package contents, including mounting hardware, before installing.





