Overview
The Icon Suspension 22029 is an extended bump stop spacer kit made of urethane for the Jeep Wrangler JL. It fits 2018-2026 Wrangler JL models, both 2 and 4 door.
It is built for use with 37-inch tires and a 2.5 in. Icon lift. Match your tire size and lift height before ordering.
Bump stops and lift height
A bump stop limits how far the axle travels up into the body under compression, which protects the shocks and the frame mounts. Extended spacers move that contact point higher, so they change how the suspension compresses before the stop engages. When a lift or larger tires change the ride height, the bump stop position becomes a more important part of the setup.
Urethane holds up well to road salt and grit, but it can split, flatten or compress over time. Look for cracks, flattening and loose mounting hardware at each service. After fitting, check shock travel and brake line clearance, since the suspension stack changes with the new spacer and any lift in place.
- Check clearance at full compression
- Inspect mounts for cracks and wear
- Recheck shock length after lift changes
- Confirm brake lines clear the new position
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 22029 |
| UPC | 700008583571 |
| Kit type | Extended bump stop spacer kit |
| Type | Urethane bump |
Vehicle fitment
It fits 2018-2026 Jeep Wrangler JL models, both 2 and 4 door.
It is for the Wrangler JL only, so Wrangler JK and Gladiator JT models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.






